GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Ubuntu 9.04(Jaunty Jackalope) |
|
 |
sane-nec(5) |
 |
sane−nec − SANE backend for NEC scanners
The sane−nec library implements a SANE (Scanner Access Now Easy) backend that provides access to NEC SCSI scanners. This backend should be considered alpha-quality software! In the current state it is known to work with PC-IN500/4C scanners. Another MultiReader scanner series is not supported. PC-IN 500/4C and MultiReader scanner are only sold in Japan.(except Multi Reader PetiScan.)
For other scanners, it may or may not work.
The backend has the following known problems:
− ColorLineart mode is
not supported.
− device name is fixed to /dev/scanner
At present, the following scanners are known to work with this backend.
Vendor Product id
------ -----------
NEC PC-IN500/4C
/etc/sane.d/nec.conf
The backend configuration file.
/usr/lib/sane/libsane−nec.a
The static library implementing this backend.
/usr/lib/sane/libsane−nec.so
The shared library implementing this backend (present on systems that support dynamic loading).
SANE_DEBUG_NEC
If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity.
sane(7), sane−scsi(5)
Kazuya Fukuda
|
sane-nec(5) | |