GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
RedHat 6.2(Zoot) |
|
 |
stty(1) |
 |
stty − change and print terminal line settings
stty
[-F device] [--file=device]
[SETTING]...
stty [-F device] [--file=device]
[-a|--all]
stty [-F device] [--file=device]
[-g|--save]
Print or change
terminal characteristics.
−a, −−all
print all current settings in human-readable form
−g, −−save
print all current settings in a stty-readable form
−F, −−file
open and use the specified device instead of stdin
|
−−help |
display this help and exit |
−−version
output version information and exit
Optional - before SETTING indicates negation. An * marks non-POSIX settings. The underlying system defines which settings are available.
Special
characters: * dsusp CHAR CHAR will send a terminal stop
signal once input flushed
eof CHAR
CHAR will send an end of file (terminate the input)
eol CHAR
CHAR will end the line
* eol2 CHAR
alternate CHAR for ending the line
erase CHAR
CHAR will erase the last character typed
intr CHAR
CHAR will send an interrupt signal
kill CHAR
CHAR will erase the current line
* lnext CHAR
CHAR will enter the next character quoted
quit CHAR
CHAR will send a quit signal
* rprnt CHAR
CHAR will redraw the current line
start CHAR
CHAR will restart the output after stopping it
stop CHAR
CHAR will stop the output
susp CHAR
CHAR will send a terminal stop signal
* swtch CHAR CHAR will switch to a different shell layer * werase CHAR CHAR will erase the last word typed
Special settings:
|
N |
set the input and output speeds to N bauds |
* cols N tell
the kernel that the terminal has N columns * columns N same
as cols N
ispeed N
set the input speed to N
* line N use line discipline N
|
min N |
with −icanon, set N characters minimum for a completed read |
ospeed N
set the output speed to N
* rows N tell the kernel that the terminal has N rows * size print the number of rows and columns according to the kernel
|
speed |
print the terminal speed | ||
|
time N |
with −icanon, set read timeout of N tenths of a second |
Control
settings:
[-]clocal
disable modem control signals
[-]cread
allow input to be received
* [-]crtscts enable RTS/CTS handshaking
|
csN |
set character size to N bits, N in [5..8] |
[-]cstopb
use two stop bits per character (one with ’-’)
|
[-]hup |
send a hangup signal when the last process closes the tty |
[-]hupcl
same as [-]hup
[-]parenb
generate parity bit in output and expect parity bit in input
[-]parodd
set odd parity (even with ’-’)
Input
settings:
[-]brkint
breaks cause an interrupt signal
[-]icrnl
translate carriage return to newline
[-]ignbrk
ignore break characters
[-]igncr
ignore carriage return
[-]ignpar
ignore characters with parity errors
* [-]imaxbel
beep and do not flush a full input buffer on a character
[-]inlcr
translate newline to carriage return
[-]inpck
enable input parity checking
[-]istrip
clear high (8th) bit of input characters
* [-]iuclc
translate uppercase characters to lowercase * [-]ixany let
any character restart output, not only start character
[-]ixoff
enable sending of start/stop characters
[-]ixon
enable XON/XOFF flow control
[-]parmrk
mark parity errors (with a 255-0-character sequence)
[-]tandem
same as [-]ixoff
Output
settings: * bsN backspace delay style, N in [0..1] * crN
carriage return delay style, N in [0..3] * ffN form feed
delay style, N in [0..1] * nlN newline delay style, N in
[0..1] * [-]ocrnl translate carriage return to newline *
[-]ofdel use delete characters for fill instead of null
characters * [-]ofill use fill (padding) characters instead
of timing for delays * [-]olcuc translate lowercase
characters to uppercase * [-]onlcr translate newline to
carriage return-newline * [-]onlret newline performs a
carriage return * [-]onocr do not print carriage returns in
the first column
[-]opost
postprocess output
* tabN horizontal tab delay style, N in [0..3] * tabs same as tab0 * −tabs same as tab3 * vtN vertical tab delay style, N in [0..1]
Local
settings:
[-]crterase
echo erase characters as backspace-space-backspace
* crtkill kill
all line by obeying the echoprt and echoe settings *
−crtkill kill all line by obeying the echoctl
and echok settings * [-]ctlecho echo control characters in
hat notation (’^c’)
[-]echo
echo input characters
* [-]echoctl
same as [-]ctlecho
[-]echoe
same as [-]crterase
[-]echok
echo a newline after a kill character
* [-]echoke
same as [-]crtkill
[-]echonl
echo newline even if not echoing other characters
* [-]echoprt
echo erased characters backward, between ’´ and
’/’
[-]icanon
enable erase, kill, werase, and rprnt special characters
[-]iexten
enable non-POSIX special characters
[-]isig
enable interrupt, quit, and suspend special characters
[-]noflsh
disable flushing after interrupt and quit special characters
* [-]prterase same as [-]echoprt * [-]tostop stop background jobs that try to write to the terminal * [-]xcase with icanon, escape with ’´ for uppercase characters
Combination settings: * [-]LCASE same as [-]lcase
|
cbreak |
same as −icanon |
−cbreak
same as icanon
|
cooked |
same as brkint ignpar istrip icrnl ixon opost isig icanon, eof and eol characters to their default values |
−cooked
same as raw
|
crt |
same as echoe echoctl echoke | ||
|
dec |
same as echoe echoctl echoke −ixany intr ^c erase 0177 kill ^u |
* [-]decctlq same as [-]ixany
|
ek |
erase and kill characters to their default values |
|||
|
evenp |
same as parenb −parodd cs7 |
|||
|
−evenp |
same as −parenb cs8 |
* [-]lcase same as xcase iuclc olcuc
|
litout |
same as −parenb −istrip −opost cs8 |
−litout
same as parenb istrip opost cs7
|
nl |
same as −icrnl −onlcr |
|||
|
−nl |
same as icrnl −inlcr −igncr onlcr −ocrnl −onlret |
|||
|
oddp |
same as parenb parodd cs7 |
|||
|
−oddp |
same as −parenb cs8 |
[-]parity
same as [-]evenp
|
pass8 |
same as −parenb −istrip cs8 | ||
|
−pass8 |
same as parenb istrip cs7 | ||
|
raw |
same as −ignbrk −brkint −ignpar −parmrk −inpck −istrip −inlcr −igncr −icrnl −ixon −ixoff −iuclc −ixany −imaxbel −opost −isig −icanon −xcase min 1 time 0 | ||
|
−raw |
same as cooked | ||
|
sane |
same as cread −ignbrk brkint −inlcr −igncr icrnl −ixoff −iuclc −ixany imaxbel opost −olcuc −ocrnl onlcr −onocr −onlret −ofill −ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok −echonl −noflsh −xcase −tostop −echoprt echoctl echoke, all special characters to their default values. |
Handle the tty line connected to standard input. Without arguments, prints baud rate, line discipline, and deviations from stty sane. In settings, CHAR is taken literally, or coded as in ^c, 0x37, 0177 or 127; special values ^- or undef used to disable special characters.
Report bugs to <bug-sh-utils@gnu.org>.
The full documentation for stty is maintained as a Texinfo manual. If the info and stty programs are properly installed at your site, the command
info stty
should give you access to the complete manual.
Copyright
© 1999 Free Software Foundation, Inc.
This is free software; see the source for copying
conditions. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
stty(1) | |