GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
RedHat 6.2(Zoot) |
|
 |
pnm2ppa(1) |
 |
pnm2ppa - convert portable anymap (PNM) to HP’s Printing Performance Architecture (PPA) file format
pnm2ppa [options] [ -i infile ] [ -o outfile ]
Reads portable anymap (PNM) format as input. (Currently, only the pixmap (PPM) subset of PNM is supported). Outputs a stream suitable for processing by Hewlett-Packard’s range of Printing Performance Architecture (PPA) printers. Currently, pnm2ppa supports the HP 710c, 712c, 720c, 722c, 820c, and 1000c series printers.
(Portable pixmap (PPM) format output can be produced from PostScript(tm) input by the GhostScript driver "ppmraw".)
−b bottommargin
Sets the bottom margin bottommargin in units of 1/600 inches (e.g., -b 150 = 0.25")
|
−-bw |
Disables the color cartridge; will print in grey scale using only the black cartridge | ||
|
−d |
Displays the current configuration | ||
|
−-eco |
Econofast mode: lower print quality that is faster and saves ink. |
−f configfile
Overrides reading the configuration from /etc/pnm2ppa.conf, and uses configfile instead.
|
−-fd |
Enable fast ordered dithering instead of using the slower, but beautiful, Floyd-Steinberg dithering | ||
|
−g |
Generates gamma.ppm in the current working directory. This file, once post-processed through pnm2ppa and printed, is suitable for the CALIBRATION procedure. See CALIBRATION for more details. |
−h, --help
Displays program usage
−i infile
Input file infile is either a path to a PPM file, or ’-’ to indicate stdin (defaults to stdin)
−l leftmargin
Sets the left margin leftmargin in units of 1/600 inches (e.g., -l 150 = 0.25")
−-noGamma
Do not use the Gamma calibration file
−o outfile | -
Output file outfile is either a path to a file or device, or ’-’ to indicate stdout (defaults to stdout)
|
−p |
Disables the black ink cartridge; i.e., print using only the color ink cartridge, even for printing "black" |
−r rightmargin
Sets the right margin rightmargin in units of 1/600 inches (e.g., -r 150 = 0.25")
−s papersize
Sets the paper size. Possible values for papersize are a4 (A4), letter or us (US Letter, 8.5"x11"), and legal (US Legal, 8.5"x14"). The default is US Letter.
−t topmargin
Sets the top margin topmargin in units of 1/600 inches (ie -t 150 = 0.25")
−v printertype
Selects the printer model. Possible values of printertype are: 710, 712, 720, 722, 820 and 1000. The default is the HP DeskJet 7X0 Series (710, 712, 720, 722).
−-verbose
Displays the program’s System Log messages on the standard output, as well.
−-version
Displays the program’s version information
−x xoffset
Sets the x-offset xoffset from the left of the page. Units are 1/600 inches
−y yoffset
Sets the y-offset yoffset from the top of the page. Units are 1/600 inches
The configuration file is read in first. Command line arguments then modify the resulting definitions.
The -x and -y options accumulate. The -v option resets all definitions back to an inbuilt default for that printer and should be used before subsequent -b -l -r, -t, -x, and -y arguments.
pbm(5)
/etc/pnm2ppa.conf
Default configuration file
/etc/pnm2ppa.gamma
Default Gamma calibration file
This code is licensed under the GNU Public License version 2. See LICENSE for details.
(c) 1998-1999 Tim Norman
(c) 1999 Giorgio Marzano
(c) 1999 Andrew van der Stock
(c) 1998-1999 Various authors for many, many fixes
This program was originally pbm2ppa, written by Tim Norman. It originally supported black and white output on the 820 series. Tim added nascent color support in early 1999. In May 1999, Giorgio Marzano starting making real headway in getting color support working properly. By September 1999, it was working pretty well. Andrew van der Stock started working on the code in late September and made everyone very nervous.
At this stage, plenty. It’s very harsh about differing paper sizes - it will stop processing if they don’t match.
|
pnm2ppa(1) | |