GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
RedHat 5.2(Apollo) |
|
 |
hwclock(8) |
 |
clock − query and set the hardware clock (RTC)
hwclock
--show
hwclock --set --date=newdate
hwclock --systohc
hwclock --hctosys
hwclock --getepoch
hwclock --setepoch --epoch=year
hwclock --adjust
hwclock --version
other options:
--utc --directisa --test --debug
Minimum unique abbreviations of all options are acceptable.
Also, equivalent options -r, -w, -s, -a, -v, -u, and -D are accepted for compatibility with the program "clock".
hwclock is a tool for accessing the Hardware Clock. You can display the current time, set the Hardware Clock to a specified time, set the Hardware Clock to the System Time, and set the System Time from the Hardware Clock.
You can also run hwclock periodically to insert or remove time from the Hardware Clock to compensate for systematic drift (where the clock consistently gains or loses time at a certain rate if left to run).
You need exactly one of the following options to tell hwclock what function to perform:
|
−−show |
Read the Hardware Clock and print the time on Standard Output. | ||
|
−−set |
Set the Hardware Clock to the time given by the −−date option. |
−−hctosys
Set the System Time from the Hardware Clock. This is a good option to use in one of the system startup scripts.
−−systohc
Set the Hardware Clock to the current System Time.
−−adjust
Add or subtract time from the Hardware Clock to account for systematic drift since the last time the clock was set or adjusted. See discussion below.
−−getepoch
Print out standard output the kernel’s Hardware Clock epoch value. This is the number of years into AD to which a zero year value in the Hardware Clock refers. For example, if you are using the convention that the year counter in your Hardware Clock contains the number of full years since 1952, then the kernel’s Hardware Counter epoch value must be 1952.
This epoch value is used whenever hwclock reads or sets the Hardware Clock.
−−setepoch
Set the kernel’s Hardware Clock epoch value to the value specified by the −−epoch option. See the −−getepoch option for details.
−−version
Print the version of
hwclock on Standard Output.
You need the following option if you specify
−−set option. Otherwise, it is
ignored.
−−date=date_string
Specifies the time to which to set the Hardware Clock. The value of this option is an argument to the date(1) program. For example,
hwclock --set --date="9/22/96 16:45:05"
−−epoch=year
Specifies the year which is the beginning of the Hardware Clock’s epoch. I.e. the number of years into AD to which a zero value in the Hardware Clock’s year counter refers.
For example,
hwclock --setepoch --epoch=1952
The following options apply to most functions.
|
−−utc |
Indicates that the Hardware Clock is kept in Coordinated Universal Time. It is your choice whether to keep your clock in UTC or local time, but nothing in the clock tells which you’ve chosen. So this option is how you give that information to hwclock. |
If you
don’t specify --utc when you should, or vice
versa, both setting and querying of the Hardware Clock will
be messed up.
−−directisa
is meaningful only on an ISA machine. For all other machines, it has no effect. This option tells hwclock to use explicit I/O instructions to access the Hardware Clock. Without this option, hwclock will try to use the /dev/rtc device (which it assumes to be driven by the rtc device driver). If it is unable to open the device (for read), it will use the explicit I/O instructions anyway.
The rtc device driver was new in Linux Release 2.
|
−−test |
Do everything except actually updating the Hardware Clock or anything else. This is useful, especially in conjunction with −−debug, in learning about hwclock. |
−−debug
Display a lot of information about what hwclock is doing internally. Some of its function is complex and this output can help you understand how the program works.
There are two main clocks in a Linux system:
The Hardware Clock: This is a clock that runs independently of any control program running in the CPU and even when the machine is powered off.
On an ISA system, this clock is specified as part of the ISA standard. The control program can read or set this clock to a whole second, but the control program can also detect the edges of the 1 second clock ticks, so the clock actually has virtually infinite precision.
This clock is commonly called the hardware clock, the real time clock, the RTC, the BIOS clock, and the CMOS clock. Hardware Clock, in its capitalized form, was coined for use by hwclock because all of the other names are inappropriate to the point of being misleading.
The System Time: This is the time kept by a clock inside the Linux kernel and driven by a timer interrupt. (On an ISA machine, the timer interrupt is part of the ISA standard). It has meaning only while Linux is running on the machine. The System Time is the number of seconds since 00:00:00 January 1, 1970 UTC (or more succinctly, the number of seconds since 1969). The System Time is not an integer, though. It has virtually infinite precision.
The System Time is the time that matters. The Hardware Clock’s basic purpose in a Linux system is to keep time when Linux is not running. You initialize the System Time to the time from the Hardware Clock when Linux starts up, and then never use the Hardware Clock again. Note that in DOS, for which ISA was designed, the Hardware Clock is the only real time clock.
It is important that the System Time not have any discontinuities such as would happen if you used the date(1L) program to set it while the system is running. You can, however, do whatever you want to the Hardware Clock while the system is running, and the next time Linux starts up, it will do so with the adjusted time from the Hardware Clock. You can also use the program adjtimex(8) to smoothly adjust the System Time while the system runs.
hwclock Uses many different ways to get and set Hardware Clock values. The most normal way is to do I/O to the device special file /dev/rtc, which is presumed to be driven by the rtc device driver. However, this method is not always available. For one thing, the rtc driver is a relatively recent addition to Linux. Older systems don’t have it.
On older systems, the method of accessing the Hardware Clock depends on the system hardware.
On an ISA system, hwclock can directly access the "CMOS memory" registers that constitute the clock, by doing I/O to Ports 0x70 and 0x71. It can only do this if running with superuser effective userid.
This is a really poor method of accessing the clock, for all the reasons that user space programs are generally not supposed to do direct I/O and disable interrupts. Hwclock provides it because it is the only method available with older Linux kernels for ISA machines.
On an m68k system, hwclock can access the clock via the console driver, via the device special file /dev/tty1.
On an Alpha, /dev/rtc is the only choice.
There are or were some Alpha Linux systems that don’t have /dev/rtc and there are or were programs that accessed the clock via almost direct I/O using /dev/port. However, this is not as good a method as /dev/rtc and such programs were not widely enough used that hwclock has any need to be backward compatible with them. So hwclock does not provide the /dev/port method and consequently will not work on an Alpha that doesn’t have /dev/rtc.
hwclock tries to use /dev/rtc. If it is compiled for a kernel that doesn’t have that function or it is unable to open /dev/rtc, hwclock will fall back to another method, if available. On an ISA machine, you can force hwclock to use the direct manipulation of the CMOS registers without even trying /dev/rtc by specifying the --directisa option.
The Hardware Clock is usually not very accurate. However, much of its inaccuracy is completely predictable -- it gains or loses the same amount of time every day. This is called systematic drift. Hwclock’s "adjust" function lets you make systematic corrections to correct the systematic drift.
It works like this: Hwclock keeps a file, /etc/adjtime, that keeps some historical information. This is called the adjtime file.
Suppose you start with no adjtime file. You issue a hwclock --set command to set the Hardware Clock to the true current time. Hwclock creates the adjtime file and records in it the current time as the last time the clock was calibrated. 5 days later, the clock has gained 10 seconds, so you issue another hwclock --set command to set it back 10 seconds. Hwclock updates the adjtime file to show the current time as the last time the clock was calibrated, and records 2 seconds per day as the systematic drift rate. 24 hours go by, and then you issue a hwclock --adjust command. Hwclock consults the adjtime file and sees that the clock gains 2 seconds per day when left alone and that it has been left alone for exactly one day. So it subtracts 2 seconds from the Hardware Clock. It then records the current time as the last time the clock was adjusted. Another 24 hours goes by and you issue another hwclock --adjust. Hwclock does the same thing: subtracts 2 seconds and updates the adjtime file with the current time as the last time the clock was adjusted.
Every time you calibrate (set) the clock, hwclock recalculates the systematic drift rate based on how long it has been since the last calibration, how long it has been since the last adjustment, what drift rate was assumed in any intervening adjustments, and the amount by which the clock is presently off.
A small amount of error creeps in any time hwclock sets the clock, so it refrains from making an adjustment that would be less than 1 second. Later on, when you request an adjustment again, the accumulated drift will be more than a second and hwclock will do the adjustment then.
It is good to do a hwclock --adjust just before the hwclock --hctosys at system startup time, and maybe periodically while the system is running via cron.
The format of the adjtime file is:
Line 1: 3 numbers: 1) systematic drift rate in seconds per day, floating point decimal; 2) Resulting number of seconds since 1969 UTC of most recent adjustment or calibration, decimal integer; 3) zero (for compatibility with clock ).
Line 2: 1 number: Resulting number of seconds since 1969 UTC of most recent calibration.
You can use an adjtime file that was previously used with the clock program with hwclock.
/etc/adjtime
adjtimex(8), date(1), gettimeofday(2), settimeofday(2), crontab(1)
Written By Bryan Henderson, September 1996 (bryanh@giraffe-data.com), based on work done on the clock program by Charles Hedrick, Rob Hooft, and Harald Koenig. See the source code for complete history and credits.
|
hwclock(8) | |