GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
RedHat 5.2(Apollo) |
|
 |
xirc2ps_cs(4) |
 |
xirc2ps_cs − Xircom CE2 and CEM device driver
insmod xirc2ps_cs.o [card_type=n] [pc_debug=n] [irq_list=i,j,...]
xirc2ps_cs is the low-level Card Services driver for the Xircom PCMCIA ethernet adapters. When this driver is attached to a card, it allocates the next available ethernet device.
card_type=n
Overrides the card type:
1 for a CE2
2 for a CEM28
3 for a CE3 (not yet supported)
4 for a CEM33.
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver. x.SH "SEE ALSO" cardmgr(8), pcmcia(5).
Please report to <xircom-bugs@isil.d.shuttle.de>
Werner Koch <werner.koch@guug.de>
xirc2ps_cs − Xircom CE2 and CEM device driver
insmod xirc2ps_cs.o [card_type=n] [pc_debug=n] [irq_list=i,j,...]
xirc2ps_cs is the low-level Card Services driver for the Xircom PCMCIA ethernet adapters. When this driver is attached to a card, it allocates the next available ethernet device.
card_type=n
Overrides the card type:
1 for a CE2
2 for a CEM28
3x for a CE3 (not yet supported)
4 for a CEM33.
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
cardmgr(8), pcmcia(5).
Please report to <xircom-bugs@isil.d.shuttle.de>
Werner Koch <werner.koch@guug.de>
|
xirc2ps_cs(4) | |