GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
RedHat 5.2(Apollo) |
|
 |
setterm(1) |
 |
setterm − set terminal attributes
setterm [
−term terminal_name ]
setterm [ −reset ]
setterm [ −initialize ]
setterm [ −cursor [on|off] ]
setterm [ −keyboard pc|olivetti|dutch|extended ]
setterm [ −repeat [on|off] ]
setterm [ −appcursorkeys [on|off] ]
setterm [ −linewrap [on|off] ]
setterm [ −snow [on|off] ]
setterm [ −softscroll [on|off] ]
setterm [ −defaults ]
setterm [ −foreground
black|red|green|yellow|blue|magenta|cyan|white|default ]
setterm [ −background
black|red|green|yellow|blue|magenta|cyan|white|default ]
setterm [ −ulcolor
black|grey|red|green|yellow|blue|magenta|cyan|white ]
setterm [ −ulcolor bright
red|green|yellow|blue|magenta|cyan|white ]
setterm [ −hbcolor
black|grey|red|green|yellow|blue|magenta|cyan|white ]
setterm [ −hbcolor bright
red|green|yellow|blue|magenta|cyan|white ]
setterm [ −inversescreen [on|off] ]
setterm [ −bold [on|off] ]
setterm [ −half-bright [on|off] ]
setterm [ −blink [on|off] ]
setterm [ −reverse [on|off] ]
setterm [ −underline [on|off] ]
setterm [ −store ]
setterm [ −clear [ all|rest ] ]
setterm [ −tabs [tab1 tab2 tab3 ... ] ] where
(tabn = 1-160)
setterm [ −clrtabs [ tab1 tab2 tab3 ... ] where
(tabn = 1-160)
setterm [ −regtabs [ 1-160 ] ]
setterm [ −blank [ 0-60 ] ]
setterm [ −powersave [ on|vsync|hsync|powerdown|off ]
]
setterm [ −powerdown [ 0-60 ] ]
setterm [ −dump [ 1-NR_CONS ] ]
setterm [ −append [ 1-NR_CONS ] ]
setterm [ −file dumpfilename ]
setterm [ −standout [ attr ] ]
setterm [ −blength [ 0-2000 ] ]
setterm [ −bfreq freqnumber ]
setterm writes to standard output a character string that will invoke the specified terminal capabilities. Where possibile terminfo is consulted to find the string to use. Some options however do not correspond to a terminfo(5) capability. In this case, if the terminal type is "con", or "linux" the string that invokes the specified capabilities on the PC Minix virtual console driver is output. Options that are not implemented by the terminal are ignored.
Most options are self explanatory. The less obvious options are as follows:
|
−term |
can be used to override the TERM environment variable. | ||
|
−reset |
displays the terminal reset string, which typically resets the terminal to its power on state. |
−initialize
displays the terminal initialization string, which typically sets the terminal’s rendering options, and other attributes to the default values.
−default
sets the terminal’s rendering options to the default values.
|
−store |
stores the terminal’s current rendering options as the default values. |
tput(1), stty(1), terminfo(5), tty(4)
Differences between the Minix and Linux versions are not documented.
Gordon Irlam
(gordoni@cs.ua.oz.au)
Adaption to Linux by Peter MacDonald
Enhancements by Mika Liljeberg (liljeber@cs.Helsinki.FI)
Beep patch by Christophe Jolif
(cjolif@storm.gatelink.fr.net)
|
setterm(1) | |