GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Debian 7.5.0(Wheezy) |
|
 |
dispread(1) |
 |
Read − Read a Display.
Read a Display, Version 1.3.5 Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile
|
−v |
Verbose mode |
−display displayname Choose X11 display name
−d n[,m]
Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access
XRandR 1.2 is faulty − falling back to older extensions
1 = ’Hitachi/HINT W240D DVI at 0, 0, width 1920, height 1200’ 2 = ’ProView/EMC/PTS at 0, 0, width 1280, height 1024’
−c listno
Set communication port from the following list (default 1)
1 = ’/dev/ttyS0’ 2 = ’/dev/ttyS1’ 3 = ’/dev/ttyS2’ 4 = ’/dev/ttyS3’
|
−p |
Use projector mode (if available) |
|||
|
−y c|l |
Display type, c = CRT, l = LCD |
−k file.cal
Load calibration file into display while reading
−K file.cal
Apply calibration file to test values while reading
|
−s |
Save spectral information (default don’t save) |
−P ho,vo,ss
Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
|
−F |
Fill whole screen with black background |
|||
|
−n |
Don’t set override redirect on test window |
|||
|
−J |
Run instrument calibration first (used rarely) |
|||
|
−N |
Disable auto calibration of instrument |
|||
|
−H |
Use high resolution spectrum mode (if available) |
|||
|
−V |
Use adaptive measurement mode (if available) |
|||
|
−w |
Disable normalisation of white to Y = 100 |
−X file.ccmx
Apply Colorimeter Correction Matrix
−X file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
−Q observ
Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c
|
−I b|w |
Drift compensation, Black: −Ib, White: −Iw, Both: −Ibw |
−C "command"
Invoke shell "command" each time a color is set
−M "command"
Invoke shell "command" each time a color is measured
−W n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
−D [level]
Print debug diagnostics to stderr
outfile
Base name for input[ti1]/output[ti3] file
Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile
|
−v |
Verbose mode |
−display displayname Choose X11 display name
−d n[,m]
Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access
XRandR 1.2 is faulty − falling back to older extensions
1 = ’Hitachi/HINT W240D DVI at 0, 0, width 1920, height 1200’ 2 = ’ProView/EMC/PTS at 0, 0, width 1280, height 1024’
−c listno
Set communication port from the following list (default 1)
1 = ’/dev/ttyS0’ 2 = ’/dev/ttyS1’ 3 = ’/dev/ttyS2’ 4 = ’/dev/ttyS3’
|
−p |
Use projector mode (if available) |
|||
|
−y c|l |
Display type, c = CRT, l = LCD |
−k file.cal
Load calibration file into display while reading
−K file.cal
Apply calibration file to test values while reading
|
−s |
Save spectral information (default don’t save) |
−P ho,vo,ss
Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
|
−F |
Fill whole screen with black background |
|||
|
−n |
Don’t set override redirect on test window |
|||
|
−J |
Run instrument calibration first (used rarely) |
|||
|
−N |
Disable auto calibration of instrument |
|||
|
−H |
Use high resolution spectrum mode (if available) |
|||
|
−V |
Use adaptive measurement mode (if available) |
|||
|
−w |
Disable normalisation of white to Y = 100 |
−X file.ccmx
Apply Colorimeter Correction Matrix
−X file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
−Q observ
Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c
|
−I b|w |
Drift compensation, Black: −Ib, White: −Iw, Both: −Ibw |
−C "command"
Invoke shell "command" each time a color is set
−M "command"
Invoke shell "command" each time a color is measured
−W n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
−D [level]
Print debug diagnostics to stderr
outfile
Base name for input[ti1]/output[ti3] file
|
dispread(1) | |