GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Debian 7.5.0(Wheezy) |
|
 |
colprof(1) |
 |
Create − Create ICC profile.
Create ICC profile, Version 1.3.5 Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Unknown flag ’−’
usage: /usr/bin/colprof [−options] inoutfile
|
−v |
Verbose mode |
|||
|
−A |
manufacturer Manufacturer description string
−M model
Model description string
−D description
Profile Description string (Default "inoutfile")
−C copyright
Copyright string
−Z [tmnb]
Attributes: Transparency, Matte, Negative, BlackAndWhite
−Z [prsa]
Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
−q lmhu
Quality − Low, Medium (def), High, Ultra
−b [lmhun]
Low quality B2A table − or specific B2A quality or none for input device
|
−y |
Verify A2B profile |
|||
|
−ni |
Don’t create input (Device) shaper curves |
|||
|
−np |
Don’t create input (Device) grid position curves |
|||
|
−no |
Don’t create output (PCS) shaper curves |
|||
|
−nc |
Don’t put the input .ti3 data in the profile |
−k zhxr
Black value target: z = zero K, h = 0.5 K, x = max K, r = ramp K (def.)
|
−k p stle stpo enpo enle shape |
stle: K level at White 0.0 − 1.0 stpo: start point of transition Wh 0.0 − Bk 1.0 enpo: End point of transition Wh 0.0 − Bk 1.0 enle: K level at Black 0.0 − 1.0 shape: 1.0 = straight, 0.0−1.0 concave, 1.0−2.0 convex
−K parameters
Same as −k, but target is K locus rather than K value itself
−l tlimit
override total ink limit, 0 − 400% (default from .ti3)
−L klimit
override black ink limit, 0 − 100% (default from .ti3)
−a lxXgsmGS
Algorithm type override l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix g = gamma+matrix, s = shaper+matrix, m = matrix only, G = single gamma+matrix, S = single shaper+matrix
|
−u |
If Lut input profile, make it absolute (non−standard) | ||
|
−un |
Same as u, but don’t extrapolate cLut white & black using matrix |
−U scale
If input profile, scale media white point by scale
|
−R |
Restrict white <= 1.0, black and primaries to be +ve |
−i illum
Choose illuminant for print/transparency spectral data: A, C, D50 (def.), D65, F5, F8, F10 or file.sp
−o observ
Choose CIE Observer for spectral data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
|
−f |
Use Fluorescent Whitening Agent compensation |
−r avgdev
Average deviation of device+instrument readings as a percentage (default 0.50%)
−s src.icc
Apply gamut mapping to output profile perceptual B2A table for given source space
−S src.icc
Apply gamut mapping to output profile perceptual and saturation B2A table
|
−nP |
Use colormetric source gamut to make output profile perceptual table | ||
|
−nS |
Use colormetric source gamut to make output profile saturation table |
−g src.gam
Use source image gamut as well for output profile gamut mapping
−p absprof,...
Incorporate abstract profile(s) into output tables
−t intent
Override gamut mapping intent for output profile perceptual table:
−T intent
Override gamut mapping intent for output profile saturation table:
a − Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw − Absolute Colorimetric (in Jab) with scaling to fit white point aa − Absolute Appearance
r − White Point Matched Appearance [ICC Relative Colorimetric]
la − Luminance axis matched Appearance
p − Perceptual (Preferred) (Default) [ICC Perceptual]
pa − Perceptual Apperance ms − Saturation
s − Enhanced Saturation [ICC Saturation]
al − Absolute Colorimetric (Lab) rl − White Point Matched Appearance (Lab)
−c viewcond
set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
−d viewcond
set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter Also sets out of gamut clipping CAM space. either an enumerated choice, or a series of parameters:value changes
pp − Practical Reflection Print (ISO−3664 P2) pe − Print evaluation environment (CIE 116−1995) pc − Critical print evaluation environment (ISO−3664 P1) mt − Monitor in typical work environment mb − Bright monitor in bright work environment md − Monitor in darkened work environment jm − Projector in dim environment jd − Projector in dark environment
pcd − Photo CD − original scene outdoors
ob − Original scene − Bright Outdoors cx − Cut Sheet Transparencies on a viewing box
|
−P |
Create gamut gammap_p.wrl and gammap_s.wrl diagostics |
−O outputfile
Override the default output filename.
inoutfile
Base name for input.ti3/output.icc file
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Unknown flag ’−’
usage: /usr/bin/colprof [−options] inoutfile
|
−v |
Verbose mode |
|||
|
−A |
manufacturer Manufacturer description string
−M model
Model description string
−D description
Profile Description string (Default "inoutfile")
−C copyright
Copyright string
−Z [tmnb]
Attributes: Transparency, Matte, Negative, BlackAndWhite
−Z [prsa]
Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
−q lmhu
Quality − Low, Medium (def), High, Ultra
−b [lmhun]
Low quality B2A table − or specific B2A quality or none for input device
|
−y |
Verify A2B profile |
|||
|
−ni |
Don’t create input (Device) shaper curves |
|||
|
−np |
Don’t create input (Device) grid position curves |
|||
|
−no |
Don’t create output (PCS) shaper curves |
|||
|
−nc |
Don’t put the input .ti3 data in the profile |
−k zhxr
Black value target: z = zero K, h = 0.5 K, x = max K, r = ramp K (def.)
|
−k p stle stpo enpo enle shape |
stle: K level at White 0.0 − 1.0 stpo: start point of transition Wh 0.0 − Bk 1.0 enpo: End point of transition Wh 0.0 − Bk 1.0 enle: K level at Black 0.0 − 1.0 shape: 1.0 = straight, 0.0−1.0 concave, 1.0−2.0 convex
−K parameters
Same as −k, but target is K locus rather than K value itself
−l tlimit
override total ink limit, 0 − 400% (default from .ti3)
−L klimit
override black ink limit, 0 − 100% (default from .ti3)
−a lxXgsmGS
Algorithm type override l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix g = gamma+matrix, s = shaper+matrix, m = matrix only, G = single gamma+matrix, S = single shaper+matrix
|
−u |
If Lut input profile, make it absolute (non−standard) | ||
|
−un |
Same as u, but don’t extrapolate cLut white & black using matrix |
−U scale
If input profile, scale media white point by scale
|
−R |
Restrict white <= 1.0, black and primaries to be +ve |
−i illum
Choose illuminant for print/transparency spectral data: A, C, D50 (def.), D65, F5, F8, F10 or file.sp
−o observ
Choose CIE Observer for spectral data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
|
−f |
Use Fluorescent Whitening Agent compensation |
−r avgdev
Average deviation of device+instrument readings as a percentage (default 0.50%)
−s src.icc
Apply gamut mapping to output profile perceptual B2A table for given source space
−S src.icc
Apply gamut mapping to output profile perceptual and saturation B2A table
|
−nP |
Use colormetric source gamut to make output profile perceptual table | ||
|
−nS |
Use colormetric source gamut to make output profile saturation table |
−g src.gam
Use source image gamut as well for output profile gamut mapping
−p absprof,...
Incorporate abstract profile(s) into output tables
−t intent
Override gamut mapping intent for output profile perceptual table:
−T intent
Override gamut mapping intent for output profile saturation table:
a − Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw − Absolute Colorimetric (in Jab) with scaling to fit white point aa − Absolute Appearance
r − White Point Matched Appearance [ICC Relative Colorimetric]
la − Luminance axis matched Appearance
p − Perceptual (Preferred) (Default) [ICC Perceptual]
pa − Perceptual Apperance ms − Saturation
s − Enhanced Saturation [ICC Saturation]
al − Absolute Colorimetric (Lab) rl − White Point Matched Appearance (Lab)
−c viewcond
set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
−d viewcond
set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter Also sets out of gamut clipping CAM space. either an enumerated choice, or a series of parameters:value changes
pp − Practical Reflection Print (ISO−3664 P2) pe − Print evaluation environment (CIE 116−1995) pc − Critical print evaluation environment (ISO−3664 P1) mt − Monitor in typical work environment mb − Bright monitor in bright work environment md − Monitor in darkened work environment jm − Projector in dim environment jd − Projector in dark environment
pcd − Photo CD − original scene outdoors
ob − Original scene − Bright Outdoors cx − Cut Sheet Transparencies on a viewing box
|
−P |
Create gamut gammap_p.wrl and gammap_s.wrl diagostics |
−O outputfile
Override the default output filename.
inoutfile
Base name for input.ti3/output.icc file
|
colprof(1) | |