GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Debian 7.3.0(Wheezy) |
|
 |
tigrc(5) |
 |
tigrc − tig configuration file
set
variable = value
bind keymap key action
color area fgcolor bgcolor [attributes]
source path
You can permanently set an option by putting it in the ~/.tigrc file. The file consists of a series of commands. Each line of the file may contain only one command.
The hash mark (#) is used as a comment character. All text after the comment character to the end of the line is ignored. You can use comments to annotate your initialization file.
Alternatively, options can be set by putting them in one of the git configuration files, which are read by tig on startup. See git−config(1) for which files to use.
A few selective variables can be configured via the set command. The syntax is:
set variables = value
Examples:
set
show−author = abbreviated # Show abbreviated author
names.
set show−date = relative # Show relative commit date.
set show−rev−graph = yes # Show revision graph?
set show−refs = yes # Show references?
set commit−order = topo # Order commits topologically
set read−git−colors = no # Do not read git's
color settings.
set show−line−numbers = no # Show line numbers?
set line−number−interval = 5 # Interval between
line numbers
set horizontal−scroll = 33% # Scroll 33% of the view
width
set blame−options = −C −C −C # Blame
lines from other files
Or in the git configuration files:
[tig]
show−date = yes # Show commit date?
author−width = 10 # Set width of the author column
line−graphics = no # Disable graphics characters
tab−size = 8 # Number of spaces per tab
The type of variables are either bool, int, string, or mixed.
Valid bool values
To set a bool variable to true use either "1", "true", or "yes". Any other value will set the variable to false.
Valid int values
A non−negative integer.
Valid string values
A string of characters. Optionally, use either ' or " as delimiters.
Valid mixed values
These values are composites of the above types. The valid values are specified in the description.
Variables
The following variables can be set:
author−width (int)
Width of the author column. When set to 5 or below, the author name will be abbreviated to the author’s initials.
filename−width (int)
Width of the filename column.
blame−options (string)
A space separated string of extra blame options. Can be used for telling git−blame(1) how to detect the origin of lines. The value is ignored when tig is started in blame mode and given blame options on the command line.
line−graphics (mixed) [ "ascii" | "default" | "utf8" | bool]
What type of character graphics for line drawing.
line−number−interval (int)
Interval between line numbers. Note, you have to toggle on line numbering with ".". The default is to number every fifth line.
horizontal−scroll (mixed)
Interval to scroll horizontally in each step. Can be specified either as the number of columns, e.g. 5, or as a percentage of the view width, e.g. 33%, where the maximum is 100%. For percentages it is always ensured that at least one column is scrolled. The default is to scroll 50% of the view width.
read−git−colors (bool)
Whether to read git’s color settings.
show−author (mixed) ["abbreviated" | "full" | bool]
How to display author names. If set to "abbreviated" author initials will be shown. Can be toggled.
show−filename (mixed) ["auto" | "always" | bool]
When to display file names. If set to "auto" file names are shown only when needed, e.g. when running: tig blame −C <file>.
show−date (mixed) ["relative" | "short" | "default" | "local" | bool]
Whether and how to show date. If set to "relative" a relative date will be used, e.g. "2 minutes ago". If set to "short" no time information is shown. If set to "local", localtime(3) is used. Can be toggled.
show−notes (mixed) [note reference | bool]
Whether to show notes for a commit. When set to a note reference the reference is passed to git show −−notes=. Notes are enabled by default.
show−refs (bool)
Whether to show references (branches, tags, and remotes) in the main view on start−up. Can be toggled.
show−rev−graph (bool)
Whether to show revision graph in the main view on start−up. Can be toggled. See also line−graphics options.
show−changes (bool)
Whether to show staged and unstaged changes in the main view. Can be toggled.
split−view−height (mixed)
Height of the lower view in a split view. Can be specified either as the number of rows, e.g. 5, or as a percentage of the view height, e.g. 80%, where the maximum is 100%. It is always ensured that the smaller of the views is at least four rows high. The default is a view height of 66%.
status−untracked−dirs (bool)
Show untracked directories contents in the status view (analog to git ls−files −−directory option). On by default.
tab−size (int)
Number of spaces per tab. The default is 8 spaces.
diff−context (int)
Number of context lines to show for diffs.
ignore−space (mixed) ["no" | "all" | "some" | "at−eol" | bool]
Ignore space changes in diff view. By default no space changes are ignored. Changing this to "all", "some" or "at−eol" is equivalent to passing "−−ignore−all−space", "−−ignore−space" or "−−ignore−space−at−eol" respectively to git diff or git show.
commit−order (mixed) ["default" | "topo" | "date" | "reverse" | bool]
Commit ordering using the default (chronological reverse) order, topological order, date order or reverse order. The default order is used when the option is set to false, and topo order when set to true.
Using bind commands keys can be mapped to an action when pressed in a given key map. The syntax is:
bind keymap key action
Examples:
# A few
keybindings
bind main w scroll−line−up
bind main s scroll−line−down
bind main space enter
bind diff a previous
bind diff d next
bind diff b move−first−line
# An external command to update from upstream
bind generic F !git fetch
Or in the git configuration files:
[tig
"bind"]
# 'unbind' the default quit key binding
main = Q none
# Cherry−pick current commit onto current branch
generic = C !git cherry−pick %(commit)
Keys are mapped by first searching the keybindings for the current view, then the keybindings for the generic keymap, and last the default keybindings. Thus, the view keybindings shadow the generic keybindings which Shadow the built−in keybindings.
Keymaps
Valid keymaps are: main, diff, log, help, pager, status, stage, tree, blob, blame, branch, and generic. Use generic to set key mapping in all keymaps.
Key values
Key values should never be quoted. Use either the ASCII value or one of the following symbolic key names. Symbolic key names are case insensitive, Use Hash to bind to the # key, since the hash mark is used as a comment character.
Enter, Space, Backspace, Tab, Escape, Left, Right, Up, Down, Insert, Delete, Hash, Home, End, PageUp, PageDown, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12.
Action names
Valid action names are described below. Note, all names are case−insensitive, and you may use −, _, and . interchangeably, e.g. "view−main", "View.Main", and "VIEW_MAIN" are the same.
Actions
Apart from the action names listed below, all actions
starting with a ! will be available as an external
command. External commands can contain variable names that
will be substituted before the command is run. By default,
commands are run in the foreground with their console output
shown, if they should be run in the background wit no output
prefix the command with @. Valid variable names
are:
Table 1. Browsing state variables
As an example, the following external command will save the current commit as a patch file: "!git format−patch −1 %(commit)". If your external command require use of dynamic features, such as subshells, expansion of environment variables and process control, this can be achieved by using a combination of git aliases and tig external commands. The following example entries can be put in either the .gitconfig or .git/config file:
[alias]
gitk−bg = !"gitk HEAD −−not $(git
rev−parse −−remotes) &"
publish = !"for i in origin public; do git push $i;
done"
[tig "bind"]
# @−prefix means that the console output will not be
shown.
generic = V !@git gitk−bg
generic = > !git publish
Table 2. View switching
Table 3. View manipulation
Table 4. View specific actions
Table 5. Cursor navigation
Table 6. Scrolling
Table 7. Searching
Table 8. Misc
Color commands control highlighting and the user interface styles. If your terminal supports color, these commands can be used to assign foreground and background combinations to certain areas. Optionally, an attribute can be given as the last parameter. The syntax is:
color area fgcolor bgcolor [attributes]
Examples:
# Overwrite the
default terminal colors to white on black.
color default white black
# Diff colors
color diff−header yellow default
color diff−index blue default
color diff−chunk magenta default
color "Reported−by:" green default
Or in the git configuration files:
[tig
"color"]
# A strange looking cursor line
cursor red default underline
# UI colors
title−blur white blue
title−focus white blue bold
Area names
Can be either a built−in area name or a custom quoted string. The latter allows custom color rules to be added for lines matching a quoted string. Valid built−in area names are described below. Note, all names are case−insensitive, and you may use −, _, and . interchangeably, e.g. "Diff−Header", "DIFF_HEADER", and "diff.header" are the same.
Color names
Valid colors include: white, black, green, magenta, blue, cyan, yellow, red, default. Use default to refer to the default terminal colors. This is recommended for background colors if you are using a terminal with a transparent background.
Colors can also be specified using the keywords color0, color1, ..., colorN−1 (N being the number of colors supported by your terminal). This is useful when you remap the colors for your display or want to enable colors supported by 256−color terminals.
Attribute names
Valid attributes include: normal, blink, bold, dim, reverse, standout, and underline. Note, not all attributes may be supported by the terminal.
UI
colors
The colors and attributes to be used for the text that is
not highlighted or that specify the use of the default
terminal colors can be controlled by setting the
default color option.
Table 9. General
Table 10. Main view colors
Table 11. Status view
Table 12. Blame view
Table 13. Tree view
Highlighting
Diff markup
Options concerning diff start, chunks and lines added and deleted.
diff−header, diff−chunk, diff−add, diff−del
Enhanced git diff markup
Extra diff information emitted by the git diff machinery, such as mode changes, rename detection, and similarity.
diff−oldmode, diff−newmode, diff−copy−from, diff−copy−to, diff−rename−from, diff−rename−to, diff−similarity, diff−dissimilarity diff−tree, diff−index
Pretty print commit headers
Commit diffs and the revision logs are usually formatted using pretty printed headers , unless −−pretty=raw was given. This includes lines, such as merge info, commit ID, and author and committer date.
pp−author, pp−commit, pp−merge, pp−date, pp−adate, pp−cdate, pp−refs
Raw commit header
Usually shown when −−pretty=raw is given, however commit is pretty much omnipresent.
commit, parent, tree, author, committer
Commit message
Signed−off−by, Acked−by, Reviewed−by and Tested−by lines are colorized.
signoff, acked, reviewed, tested
Tree markup
Colors for information of the tree view.
tree−dir, tree−file
Sources commands makes it possible to read additional configuration files. Sourced file are treated in−place, meaning when a source command is encountered it will be immediately read. Any commands, later in the current configuration file will take precedence. The syntax is:
source path
Examples:
source
~/.tig/colorscheme.tigrc
source ~/.tig/keybindings.tigrc
Copyright (c) 2006−2012 Jonas Fonseca <fonseca@diku.dk [1] >
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
tig(1), tigmanual(7), git−config(1), and the tig manual [2] .
|
1. |
fonseca@diku.dk |
mailto:fonseca@diku.dk
|
2. |
tig manual |
http://jonas.nitro.dk/tig/manual.html
|
tigrc(5) | |