GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Debian 7.2.0(Wheezy) |
amd64 |
 |
collink(1) |
 |
Link − Link ICC profiles.
Link ICC profiles, Version 1.3.5 Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Too few arguments, got 1 expect at least 3
usage: collink [options] srcprofile dstprofile linkedprofile
|
−v |
Verbose |
|||
|
−A |
manufacturer Manufacturer description string
−M model
Model description string
−D description
Profile Description string (Default "inoutfile")
−C copyright
Copyright string
|
−V |
Verify existing profile, rather than link |
−q lmhu
Quality − Low, Medium (def), High, Ultra
|
−r res |
Override clut res. set by −q | ||
|
−n |
Don’t preserve device linearization curves in result | ||
|
−f |
Special :− Force neutral colors to be K only output | ||
|
−fk |
Special :− Force K only neutral colors to be K only output | ||
|
−F |
Special :− Force all colors to be K only output | ||
|
−fcmy |
Special :− Force 100% C,M or Y only to stay pure |
−p absprof
Include abstract profile in link
|
−s |
Simple Mode (default) |
−g [src.gam]
Gamut Mapping Mode [optional source image gamut]
−G [src.gam]
Gamut Mapping Mode using inverse outprofile A2B
Simple Mode Options: −i in_intent p = perceptual, r = relative colorimetric,
s = saturation, a = absolute colorimetric
−o out_intent
p = perceptual, r = relative colorimetric, s = saturation, a = absolute colorimetric
Gamut Mapping
Mode Options:
−i intent
set linking intent from the following choice:
a − Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw − Absolute Colorimetric (in Jab) with scaling to fit white point aa − Absolute Appearance
r − White Point Matched Appearance [ICC Relative Colorimetric]
la − Luminance axis matched Appearance
p − Perceptual (Preferred) (Default) [ICC Perceptual]
pa − Perceptual Apperance ms − Saturation
s − Enhanced Saturation [ICC Saturation]
al − Absolute Colorimetric (Lab) rl − White Point Matched Appearance (Lab)
−w [J,a,b]
Use forced whitepoint hack [optional target point]
−c viewcond
set source viewing conditions for CIECAM02, either an enumerated choice, or a parameter
−d viewcond
set destination viewing conditions for CIECAM02, either an enumerated choice, or parameter:value changes
pp − Practical Reflection Print (ISO−3664 P2) pe − Print evaluation environment (CIE 116−1995) pc − Critical print evaluation environment (ISO−3664 P1) mt − Monitor in typical work environment mb − Bright monitor in bright work environment md − Monitor in darkened work environment jm − Projector in dim environment jd − Projector in dark environment
pcd − Photo CD − original scene outdoors
ob − Original scene − Bright Outdoors cx − Cut Sheet Transparencies on a viewing box
s:surround
n = auto, a = average, m = dim, d = dark, c = transparency (default average)
w:X:Y:Z
Adapted white point as XYZ (default media white)
|
w:x:y |
Adapted white point as x, y |
a:adaptation
Adaptation luminance in cd.m^2 (default 50.0)
b:background
Background % of image luminance (default 20)
l:scenewhite
Scene white in cd.m^2 if surround = auto (default 250)
f:flare
Flare light % of image luminance (default 1)
f:X:Y:Z
Flare color as XYZ (default media white)
|
f:x:y |
Flare color as x, y |
−t tlimit
set source total ink limit, 0 − 400% (estimate by default)
−T klimit
set source black ink limit, 0 − 100% (estimate by default)
Inverse outprofile A2B Options: −k tezhxr CMYK Black generation
t = transfer K from source to destination, e = retain K of destination B2A table z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default)
|
−k p stle stpo enpo enle shape |
p = black target generation curve parameters
|
−k q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 |
q = transfer source K to dual curve limits
−K parameters
Same as −k, but target is K locus rather than K value itself
−l tlimit
set destination total ink limit, 0 − 400% (estimate by default)
−L klimit
set destination black ink limit, 0 − 100% (estimate by default)
|
−P |
Create gamut gammap.wrl diagostic |
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Too few arguments, got 1 expect at least 3
usage: collink [options] srcprofile dstprofile linkedprofile
|
−v |
Verbose |
|||
|
−A |
manufacturer Manufacturer description string
−M model
Model description string
−D description
Profile Description string (Default "inoutfile")
−C copyright
Copyright string
|
−V |
Verify existing profile, rather than link |
−q lmhu
Quality − Low, Medium (def), High, Ultra
|
−r res |
Override clut res. set by −q | ||
|
−n |
Don’t preserve device linearization curves in result | ||
|
−f |
Special :− Force neutral colors to be K only output | ||
|
−fk |
Special :− Force K only neutral colors to be K only output | ||
|
−F |
Special :− Force all colors to be K only output | ||
|
−fcmy |
Special :− Force 100% C,M or Y only to stay pure |
−p absprof
Include abstract profile in link
|
−s |
Simple Mode (default) |
−g [src.gam]
Gamut Mapping Mode [optional source image gamut]
−G [src.gam]
Gamut Mapping Mode using inverse outprofile A2B
Simple Mode Options: −i in_intent p = perceptual, r = relative colorimetric,
s = saturation, a = absolute colorimetric
−o out_intent
p = perceptual, r = relative colorimetric, s = saturation, a = absolute colorimetric
Gamut Mapping
Mode Options:
−i intent
set linking intent from the following choice:
a − Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw − Absolute Colorimetric (in Jab) with scaling to fit white point aa − Absolute Appearance
r − White Point Matched Appearance [ICC Relative Colorimetric]
la − Luminance axis matched Appearance
p − Perceptual (Preferred) (Default) [ICC Perceptual]
pa − Perceptual Apperance ms − Saturation
s − Enhanced Saturation [ICC Saturation]
al − Absolute Colorimetric (Lab) rl − White Point Matched Appearance (Lab)
−w [J,a,b]
Use forced whitepoint hack [optional target point]
−c viewcond
set source viewing conditions for CIECAM02, either an enumerated choice, or a parameter
−d viewcond
set destination viewing conditions for CIECAM02, either an enumerated choice, or parameter:value changes
pp − Practical Reflection Print (ISO−3664 P2) pe − Print evaluation environment (CIE 116−1995) pc − Critical print evaluation environment (ISO−3664 P1) mt − Monitor in typical work environment mb − Bright monitor in bright work environment md − Monitor in darkened work environment jm − Projector in dim environment jd − Projector in dark environment
pcd − Photo CD − original scene outdoors
ob − Original scene − Bright Outdoors cx − Cut Sheet Transparencies on a viewing box
s:surround
n = auto, a = average, m = dim, d = dark, c = transparency (default average)
w:X:Y:Z
Adapted white point as XYZ (default media white)
|
w:x:y |
Adapted white point as x, y |
a:adaptation
Adaptation luminance in cd.m^2 (default 50.0)
b:background
Background % of image luminance (default 20)
l:scenewhite
Scene white in cd.m^2 if surround = auto (default 250)
f:flare
Flare light % of image luminance (default 1)
f:X:Y:Z
Flare color as XYZ (default media white)
|
f:x:y |
Flare color as x, y |
−t tlimit
set source total ink limit, 0 − 400% (estimate by default)
−T klimit
set source black ink limit, 0 − 100% (estimate by default)
Inverse outprofile A2B Options: −k tezhxr CMYK Black generation
t = transfer K from source to destination, e = retain K of destination B2A table z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default)
|
−k p stle stpo enpo enle shape |
p = black target generation curve parameters
|
−k q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 |
q = transfer source K to dual curve limits
−K parameters
Same as −k, but target is K locus rather than K value itself
−l tlimit
set destination total ink limit, 0 − 400% (estimate by default)
−L klimit
set destination black ink limit, 0 − 100% (estimate by default)
|
−P |
Create gamut gammap.wrl diagostic |
|
collink(1) | |