GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
Debian 6.0.5(Squeeze) |
|
 |
l2test(1) |
 |
l2test − L2CAP testing
l2test
l2test is L2CAP testing program.
l2test <mode> [options] [bdaddr] Modes: -r listen and receive -w listen and send -d listen and dump incoming data -x listen, then send, then dump incoming data -s connect and send -u connect and receive -n connect and be silent -y connect, then send, then dump incoming data -c connect, disconnect, connect, ... -m multiple connects -p trigger dedicated bonding -z information request Options: [-b bytes] [-i device] [-P psm] [-I imtu] [-O omtu] [-L seconds] enable SO_LINGER [-W seconds] enable deferred setup [-B filename] use data packets from file [-N num] send num frames (default = infinite) [-C num] send num frames before delay (default = 1) [-D milliseconds] delay after sending num frames (default = 0) [-X mode] select retransmission/flow-control mode [-F fcs] use CRC16 check (default = 1) [-R] reliable mode [-G] use connectionless channel (datagram) [-A] request authentication [-E] request encryption [-S] secure connection [-M] become master [-T] enable timestamps
This manual page was written by Nobuhiro Iwamatsu <iwamatsu@debian.org>, for the Debian GNU/Linux system (but may be used by others).
|
l2test(1) | |