GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
CentOS 5.3 |
|
 |
dvcont(1) |
 |
dvcont − send control commands to DV cameras
dvcont <command1> [ <command2> ... ]
dvcont
is a command line tool to send control commands via an
IEEE1394 link to a device that implements the AV/C
specifications by the 1394 Trade Association. Or for the
non-techies: dvcont lets you remote control your DV
camera via a Firewire cable. The following commands
are understood:
dev <number>
Select device number on chain to use. (dvcont tries to automatically detect the camera. Use the dev command BEFORE any other commands for manual control.)
|
play |
Tell the camera to play. If already playing, it toggles slow-motion. |
reverse
Tell the camera to play in reverse. If already playing, it toggles slow-motion.
trickplay < -14 to +14 >
Tell the camera to play at various speeds. 0 = forward play, -14 = fastest reverse, -8 = 1X reverse, -1 = slowest reverse, 1 = slowest forward, 8 = 1X forward, 14 = fastest forward. (Not supported by all cameras.)
|
stop |
Tell the camera to stop playing. | ||
|
rewind |
Tell the camera to rewind. (Use in stop or play mode.) | ||
|
ff |
Tell the camera to fast forward. (Use in stop or play mode.) | ||
|
pause |
Tell the camera to toggle pause play. | ||
|
next |
Tell the camera to go to the next frame. (Use in pause mode.) |
nextindex
Tell the camera to search for the next scene. (Use in pause or play mode.)
|
prev |
Tell the camera to go to the previous frame. (Use in pause mode) |
previndex
Tell the camera to search for the previous scene. (Use in pause or play mode)
|
record |
Tell the camera to record. (Use with caution!) | ||
|
eject |
Tell the camera to eject the tape. (Not supported by all cameras.) |
timecode
Report the timecode on tape in the format HH:MM:SS:FF (hours, minutes, seconds, intra-second frames).
seek <timecode>
Tell the camera to go to the timecode, given in format HH:MM:SS:FF as above.
|
status |
Report the status of the device. |
pluginfo
Report available plugs.
verbose
Tell the program to tell you debug info.
version
Tell the program to tell you the program version.
|
help |
Tell the program to show you a help screen. |
dvcont was written by Jason Howard <jason@spectsoft.com> and Dan Dennedy <dan@dennedy.org>. This man page was written with the help of help2man by Daniel Kobras <kobras@debian.org> for the Debian GNU/Linux distribution (but may be used by others). Updated by Dan Dennedy <dan@dennedy.org>.
|
dvcont(1) | |