CentOS 5.1

GNU/Linux	CentOS 5.1
	pamthreshold(1)

pamthreshold

Updated: 12 May 2006
Table Of Contents

NAME

pamthreshold - threshold grayscale image to black and white

SYNOPSIS

pamthreshold [-simple] [-local=widthxheight] [-dual=widthxheight]
[-threshold=threshold] [-contrast=threshold] [inputpamfile]

Minimum unique abbreviation of options is acceptable. You may use double
hyphens instead of a single hyphen to denote options. You may use white
space in place of the equals sign to separate an option name from its value.

DESCRIPTION

This program is part of Netpbm.

pamthreshold thresholds a grayscale image. Thresholding means dividing the
image into background and foreground by comparing every pixel to a
thresholding value.

The input should be a PGM image or a PAM image of tuple type GRAYSCALE.
However, pamthreshold doesn’t check; it just thresholds the first channel as
if it were grayscale samples. So if you feed it e.g. a PPM image, it will
work but produce probably useless results.

The output is a PAM with tuple type BLACKANDWHITE. You can turn this into a
PBM (if you need to use it with an older program that doesn’t understand
PAM) with pamtopnm.

The output is to Standard Output.

Another way to convert a grayscale image to black and white is to dither.
Dithering is using clustered black and white pixels such that if you step
back and look at the picture, you see varying levels of gray. pamditherbw
does dithering.

OPTIONS

Without any options, pamthreshold uses an iterative algorithm found in the
wikipedia article Thresholding (image processing) to compute the
thresholding value. It uses this threshold to globally threshold the image.
This should work well for most images. The program issues a message telling
you what threshold it used. (Netpbm messages go to Standard Error, and you
can turn them off with the Netpbm command option -quiet).
-simple
This selects simple or global thresholding, i.e. pamthreshold
compares every pixel to the threshold you specify with -threshold.
This works well for black and white text pages scanned with a flatbed
scanner and is faster than the default method that iteratively
determines the thresholding value first.
-local=widthxheight
This selects local adaptive thresholding (also known as dynamic
thresholding) using the neighborhood of width and height around every
pixel. pamthreshold computes the threshold individually for each
pixel of the image. This can accommodate changing lighting conditions
in the image. Depending on the size of the neighborhood this can be
quite slow.
-dual=widthxheight
This selects a dual thresholding algorithm using a global threshold
for low contrast neighborhoods and local thresholding otherwise. This
can preserve larger back- respectively foreground areas than local
adaptive thresholding. This algorithm was proposed in the paper "An
Approach To Licence Plate Recognition" by J.R. Parker and Pavol
Federl.
-threshold=threshold
This sets the thresholding value for simple or local thresholding.
The value is a floating point number in the range [0, 1], where 0 is
black and 1 is the maxval of the image.
If you don’t specify this option, pamthreshold uses a threshold of
0.5. Without -simple or -local this option is meaningless.
-contrast=threshold
This sets the threshold to determine if a neighborhood has low
contrast or not for dual thresholding. The value is a floating point
number in the range [0, 1].
If you don’t specify this option, pamthreshold uses a contrast
threshold of 0.05. Without -dual this option is meaningless.

GNU/Linux man pages

Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :

ISBN : 978-2-7460-9712-4
EAN : 9782746097124
(Editions ENI)

GNU/Linux

pamthreshold(1)