GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
CentOS 4.8 |
i386 |
 |
racoon(8) |
 |
RACOON(8) BSD System Manager’s Manual RACOON(8)
NAME
racoon — IKE (ISAKMP/Oakley) key management daemon
SYNOPSIS
racoon [−BFvdL46] [−f configfile] [−l logfile] [−p isakmp-port] [−P isakmp-natt-port]
DESCRIPTION
racoon speaks IKE (ISAKMP/Oakley) key management protocol, to establish security association with other hosts. SPD (Security Policy Database) in the kernel usually triggers to start racoon. racoon usually sends all of informational messages, warnings and error messages to syslogd(8) with the facility LOG_DAEMON, the priority LOG_INFO. Debugging messages are sent with the priority LOG_DEBUG. You should configure syslog.conf(5) appropriately to see these messages.
−B
Install SA(s) from the file which is specified in racoon.conf(5).
−F
Run racoon in the foreground.
−f configfile
Use configfile as the configuration file instead of the default.
−l logfile
Use logfile as the logging file instead of syslogd(8).
−p isakmp-port
Listen to ISAKMP key exchange on port isakmp-port instead of the default port number, 500.
−P isakmp-natt-port
Use isakmp-natt-port for NAT-Traversal port-floating. The default is 4500.
−v
The flag causes the packet dump be more verbose, with higher debugging level.
−d
Increase the debug level. Multiple −d will increase the debug level even more.
−L
Include file_name:line_number:fuction_name location in all messages.
−4
−6
Specifies the default address family for the sockets.
racoon assumes the presence of kernel random number device rnd(4) at /dev/urandom. Informational messages are labeled info, and debugging messages are labeled debug. You have to configure syslog.conf(5) if you want to see them in a logging file.
RETURN VALUES
The command exits with 0 on success, and non-zero on errors.
FILES
/usr/local/v6/etc/racoon.conf
default configuration file.
SEE ALSO
ipsec(4), racoon.conf(5), syslog.conf(5), setkey(8), syslogd(8)
HISTORY
The racoon command first appeared in ’’YIPS’’ Yokogawa IPsec implementation.
SECURITY CONSIDERATIONS
The use of IKE phase 1 aggressive mode is not recommended, as describved in http://www.kb.cert.org/vuls/id/886601.
KAME November 20, 2000 KAME
|
racoon(8) | |