Flashnux

GNU/Linux man pages

Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :

ISBN : 978-2-7460-9712-4
EAN : 9782746097124
(Editions ENI)

GNU/Linux

CentOS 4.8

i386

losetup(8)


LOSETUP

LOSETUP

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
RETURN VALUE
FILES
EXAMPLE
RESTRICTION

NAME

losetup − set up and control loop devices

SYNOPSIS

losetup [ [−e|−E] encryption ] [ −o offset ] [ −p pfd ] loop_device file
losetup
[ −d ] loop_device

DESCRIPTION

losetup is used to associate loop devices with regular files or block devices, to detach loop devices and to query the status of a loop device. If only the loop_device argument is given, the status of the corresponding loop device is shown.

Encryption
It is possible to specify transfer functions (for encryption/decryption or other purposes) using one of the −E and −e options. There are two mechanisms to specify the desired encryption: by number and by name. If an encryption is specified by number then one has to make sure that the Linux kernel knows about the encryption with that number, probably by patching the kernel. Standard numbers that are always present are 0 (no encryption) and 1 (XOR encryption). When the cryptoloop module is loaded (or compiled in), it uses number 18. This cryptoloop module wil take the name of an arbitrary encryption type and finds the module that knows how to perform that encryption. (Thus, either one uses a number different from 18 with the −E option, or one uses a name with the −e option.)

OPTIONS

−d

Detach the file or device associated with the specified loop device.

−E encryption_type

Enable data encryption with specified number.

−e encryption_name

Enable data encryption with specified name.

−o offset

The data start is moved offset bytes into the specified file or device.

−p num

Read the passphrase from file descriptor with number num instead of from the terminal.

RETURN VALUE

losetup returns 0 on success, nonzero on failure. When losetup displays the status of a loop device, it returns 1 if the device is not configured and 2 if an error occurred which prevented losetup from determining the status of the device.

FILES

/dev/loop0, /dev/loop1, ... loop devices (major=7)

EXAMPLE

If you are using the loadable module you must have the module loaded first with the command

# insmod loop.o

Maybe also encryption modules are needed.

# insmod des.o # insmod cryptoloop.o

The following commands can be used as an example of using the loop device.

# dd if=/dev/zero of=/file bs=1k count=100
# losetup -e des /dev/loop0 /file
Password:
Init (up to 16 hex digits):
# mkfs -t ext2 /dev/loop0 100
# mount -t ext2 /dev/loop0 /mnt
...
# umount /dev/loop0
# losetup -d /dev/loop0

If you are using the loadable module you may remove the module with the command

# rmmod loop

RESTRICTION

DES encryption is painfully slow. On the other hand, XOR is terribly weak.



losetup(8)