Flashnux

GNU/Linux man pages

Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :

ISBN : 978-2-7460-9712-4
EAN : 9782746097124
(Editions ENI)

GNU/Linux

CentOS 4.8

i386

Net::LDAP::FAQ(3pm)


Net::LDAP::FAQ

Net::LDAP::FAQ

NAME
SYNOPSIS
DESCRIPTION
GENERAL
LDAP AND DIRECTORY TERMINOLOGY.
PERL-LDAP INSTALLATION
USING NET::LDAP
GETTING SEARCH RESULTS
USING NET::LDAPS
USING LDAP GROUPS.
USING DSML.
USING CONTROLS AND VIRTUAL LISTS.
GENERAL QUESTIONS.
Using X.509 certificates.
ADDITIONAL DIRECTORY AND LDAP RESOURCES.
AUTHORS
COPYRIGHT

NAME

Net::LDAP::FAQ − Frequently Asked Questions about Net::LDAP

SYNOPSIS

 perldoc Net::LDAP::FAQ

DESCRIPTION

This document serves to answer the most frequently asked questions on both the perl-ldap Mailing List and those sent to Graham Barr.

The latest version of this FAQ can be found at
http://perl−ldap.sourceforge.net/FAQ.html

GENERAL

What is perl-ldap ?

perl-ldap is the distribution name. The perl-ldap distribution contains the Net::LDAP modules.

Why another perl LDAP implementation ?

perl−ldap’s goal is to be as portable as possible. It does this by being implemented completely in perl. So basically anywhere that perl runs perl-ldap will run. This is not true for other implementations which require a C compiler.

Where can I get it ?

Perl-ldap is available from CPAN . You will find it in the authors/id/GBARR directory. Alternatively you can download the latest version from
http://www.cpan.org/search?dist=perl−ldap

WARNING: The perl-ldap module is stored on CPAN as a *.gz file. Netscape on Windows systems sometimes has a problem storing the module with the correct name, it will replace the *.tar.gz with *_tar.tar. To correct the problem, with the pointer on the link, do a right click and then select save link as to save the file with the correct file name.

Is there a web page for perl-ldap ?

Yes there is at http://perl−ldap.sourceforge.net/

Is there a mailing list ?

Yes there is at perl−ldap@perl.org

You can subscribe to this list by mailing perl−ldap−subscribe@perl.org

Is the mailing list archived ?

Yes, at http://archive.develooper.com/perl−ldap@perl.org/

Archives of messages since we switched to using sourceforge can be found at

 http://www.geocrawler.com/lists/3/SourceForge/3482/0/

Please be aware that the geocrawler system munges code that is in the email messages. In particular, apostrophes (’) are turned into back ticks (’) and newlines escapes (\n) are removed (and probably other escapes as well).

There is also an archive of the perl-ldap mailing list at http://www.xray.mpe.mpg.de/mailing−lists/perl−ldap/ which also has messages from before the move to sourceforge. The xray archive does not munge email messages.

Is there any online documentation ?

Yes. perl-ldap has online documentation at
http://perl−ldap.sourceforge.net/ which will have the latest documentation available.

Is there a public CVS repository ?

Yes, it is located at sourceforge.net

Can I get perl-ldap from the public CVS repository?

Yes, any one can pull perl-ldap from the public CVS repository on sourceforge.net.

There are several ways this can be done.

Web;

You can download it from SourceForge by following the release link:

The 2 lines in the following example should be put together as one continuous line. Example;

 http://download.sourceforge.net/perl-ldap/perl-ldap-0.20.tar.gz

WARNING: The perl-ldap module is stored on CPAN as a *.gz file. Netscape on Windows systems sometimes has a problem storing the module with the correct name, it will replace the *.tar.gz with *_tar.tar. To correct the problem, with the pointer on the link, do a right click and then select save link as to save the file with the correct file name.

CVS ;

You can download latest version of perl-ldap from SourceForge by executing a anonymous CVS "get" command. When the password is requested press the enter key.

The 2 lines in the following example should be put together as one continuous line. Example;

 cvs -d:pserver:anonymous@cvs.perl-ldap.sourceforge.net:/cvsroot/perl-ldap

Web page;

Most of the time there is a URL link on the perl-ldap home page on sourceforge that points to the latest released version of perl−ldap. Due to the fact that humans must update the web page to point to a new release it sometimes does not get updated as quickly as it should.

WARNING: The perl-ldap module is stored on CPAN as a *.gz file. Netscape on Windows systems sometimes has a problem storing the module with the correct name, it will replace the *.tar.gz with *_tar.tar. To correct the problem, with the pointer on the link, do a right click and then select save link as to save the file with the correct file name.

What is CVS .

" CVS " is an acronym for the "Concurrent Versions System". CVS is a "Source Control" or "Revision Control" tool designed to keep track of source changes made by groups of developers working on the same files, allowing them to stay in sync with each other as each individual chooses.

LDAP AND DIRECTORY TERMINOLOGY.

In order to help the user understand the perl-ldap module better some key LDAP terminology is defined here.

What is a directory.

A directory is a special purpose hierarchical database that usually contains typed information such as text strings, binary data, or X.509 certificates.

What is LDAP .

LDAP stands for Lightweight Directory Access Protocol. The word Protocol is the key word in the definition given in the preceding sentence, LDAP is NOT hardware or software. It is a protocol that defines how a client and server will communicate with one another.

The Lightweight Directory Access Protocol is defined in a series of Requests For Comments, better known as RFCs. The RFCs can be found on the Internet at http://www.ietf.org/ (the master repository) and many other places. There’s a link to all the LDAP-related RFCs at Perl−LDAP’s web site, http://perl−ldap.sourceforge.net/rfc.html. Some of the more important RFC numbers are RFC 1777 for LDAPv2 and RFC 2251 for LDAPv3.

What is a LDAP Directory.

In the strictest terms of the definition there is no such thing as a LDAP directory. To be practical about this situation every day directory professionals refer to their directory as " a LDAP directory" because it is easy to say and it does convey the type of protocol used to communicate with their directory. Using this definition a LDAP directory is a directory whose server software conforms to the Lightweight Directory Access Protocol when communicating with a client.

What is an Entry.

The traditional directory definition of a directory object is called an Entry. Entries are composed of attributes that contain the information to be recorded about an object.

(An entry in LDAP is somewhat analogous to a record in a table in an SQL database, but don’t get too hung up about this analogy!)

Entries are held in an upside-down tree structure. Entries can therefore contain subordinate entries, and entries must have one direct superior entry.

Entries with subordinate entries are called ’non−leaf’ entries.

Entries without subordinate entries are called ’leaf’ entries.

An entry’s direct superior entry is called the entry’s ’parent’.

’Non−leaf’ entries are also said to have ’child’ entries.

What is an attribute.

The entry(s) in a directory are composed of attributes that contain information about the object. Each attribute has a type and can contain one or more values.

For example:

  cn=Road Runner

is an attribute with a type named "cn", and one value.

Each attribute is described by a ’syntax’ which defines what kind of information can be stored in the attributes values. Trying to store a value that doesn’t conform to the attribute’s syntax will result in an error.

For example:

  jpegPhoto=unknown

is not permitted by the directory, because jpegPhotos may only contain JPEG-formatted images.

Most syntaxes used in LDAP however describe text strings rather than binary objects (like JPEGs or certificates.)

In LDAPv3 most of these syntaxes support Unicode encoded using UTF−8 . Because the Net::LDAP modules do not change the strings that you pass in as attribute values (they get sent to the LDAP server as−is) to use accented characters you simply need to encode your strings in UTF−8 . There are modules on CPAN that will help you here.

Note that LDAPv2 servers used something called T.61 instead of Unicode and UTF−8 . Most servers do not implement T.61 correctly, and it is recommended that you use LDAPv3 instead.

Attributes may also be searched. The algorithms used to perform different kinds of searches are described by the attribute’s ’matching rules’. Some matching rules are case-sensitive and some are case−insensitive, for example. Sometimes matching rules aren’t defined for a particular attribute: there’s no way to search for jpegPhotos that contain a substring!

You can examine all of a server’s attribute definitions by reading the schema from the server.

What is an object class.

An object class is the name associated with a group of attributes that must be present in an entry, and the group of attributes that may also be present in an entry.

Object classes may be derived (subclassed) from other object classes. For example the widely used ’inetOrgPerson’ object class is derived from ’organizationalPerson’, which is itself derived from ’person’ which is itself derived from ’top’.

Every entry has an attribute called ’objectClass’ that lists all the names of object classes (and their superclasses) being used with the entry.

You can examine all of a server’s objectclass definitions by reading the schema from the server.

What is a Distinguished Name ( DN ).

Every entry in a directory has a Distinguished Name, or DN . It is a unique Entry identifier throughout the complete directory. No two Entries can have the same DN within the same directory.

Examples of DNs:

 cn=Road Runner, ou=bird, dc=cartoon, dc=com
 ou=bird, dc=cartoon, dc=com
 dc=cartoon, dc=com
 dc=com

What is a Relative Distinguished Name.

Every DN is made up of a sequence of Relative Distinguished Names, or RDNs. The sequences of RDNs are separated by commas (,). In LDAPv2 semi-colons (;) were also allowed. There can be more than one identical RDN in a directory, but they must have different parent entries.

Technically, an RDN contains attribute-value assertions, or AVAs. When an AVA is written down, the attribute name is separated from the attribute value with an equals (=) sign.

Example of a DN:

 cn=Road Runner,ou=bird,dc=cartoon,dc=com

 RDNs of the proceeding DN:
 RDN => cn=Road Runner
 RDN => ou=bird
 RDN => dc=cartoon
 RDN => dc=com

RDNs can contain multiple attributes, though this is somewhat ususual. They are called multi-AVA RDNs, and each AVA is separated in the RDN from the others with a plus sign (+).

Example of a DN with a multi-AVA RDN:

 cn=Road Runner+l=Arizona,ou=bird,dc=cartoon,dc=com

Where is an entry’s name held?

Entries do not contain their DN . When you retrieve an entry from a search, the server will tell you the DN of each entry.

On the other hand, entries do contain their RDN . Recall that the RDN is formed from one or more attribute-value assertions (AVAs); each entry must contain all the attributes and values in the RDN .

For example the entry:

 cn=Road Runner+l=Arizona,ou=bird,dc=cartoon,dc=com

must contain a ’cn’ attribute containing at least the value "Road Runner", and an ’l’ attribute containing at least the value "Arizona".

The attributes used in the RDN may contain additional values, but the entry still only has one DN .

What is a search base.

A search base is a Distinguished Name that is the starting point of search queries.

Example of a DN:

 cn=Road Runner,ou=bird,dc=cartoon,dc=com

Possible search base(s) for the proceeding DN:

 Base => cn=Road Runner,ou=bird,dc=cartoon,dc=com
 Base => ou=bird,dc=cartoon,dc=com
 Base => dc=cartoon,dc=com
 Base => dc=com

Setting the search base to the lowest possible branch of the directory will speed up searches considerably.

What is the difference between a LDAP server and a relational database.

The most basic difference is that a directory server is a specialized database designed to provide fast searches. While a relational database is optimized for transactions (where a series of operations is counted as 1, thus if one of the steps fails, the RDBMS can roll-back to the state it was in before you started).

Directories also typically are hierarchical in nature ( RDBMS is typically flat, but you can implement a hierarchy using tables and queries), networkable, distributed and replicated.

LDAP provides an open-standard to a directory service.

Typically we use LDAP for email directories (all popular email clients provide an LDAP client now) and authorization services (authentication and access control).

You could use a RDBMS for these types of queries but there’s no set standard, in particular over TCP/IP to connect to databases over the network. There’s language specific protocols (like Perl’s DBI and Java’s JDBC ) that hide this problem behind an API abstraction, but that’s not a replacement for a standard access protocol.

LDAP is starting to be used on roles traditionally played by RDBMS in terms of general data management because it’s easier to setup a LDAP server (once you understand the basic nomenclature) and you don’t need a DBA to write your queries and more importantly all LDAP servers speak the same essential protocol, thus you don’t have to fuss with a database driver trying to connect it to the Internet. Once you have an LDAP server up and running, it’s automatically available over the ’net. It’s possible to connect to a LDAP server from a variety of mechanisms, including just about every possible programming language.

More information on this topic can be found on the following URLs;

 http://www.openldap.org/faq/data/cache/378.html
 http://www.isode.com/whitepapers/ic-6055.html

What is the difference between a ldap reference and a ldap referral?

A referral is returned when the entire operation must be resent to another server.

A continuation reference is returned when part of the operation must be resent to another server.

See RFC 2251 section 4.5.3 for more details.

PERL-LDAP INSTALLATION

How do I install perl-ldap ?

To install the modules that are in the perl-ldap distribution follow the same steps that you would for most other distributions found on CPAN , that is

   # replace 0.27 with the version you have
   gunzip perl-ldap-0.27.tar.gz
   tar xvf perl-ldap-0.27.tar
   cd perl-ldap-0.27

   perl Makefile.PL
   make
   make test
   make install

But I do not have make, how can I install perl-ldap ?

Well as luck would have it the modules in perl-ldap do not do anything complex, so a simple copy is enough to install. First run

  perl -V

This will output information about the version of perl you have installed. Near the bottom you will find something like

  @INC:
    /usr/local/perl/perl5.005/lib/5.00502/sun4-solaris
    /usr/local/perl/perl5.005/lib/5.00502
    /usr/local/perl/perl5.005/lib/site_perl/5.005/sun4-solaris
    /usr/local/perl/perl5.005/lib/site_perl/5.005
    .

This is a list of directories that perl searches when it is looking for a module. The directory you need is the site_perl directory, but without the system architecture name, in this case it is "/usr/local/perl/perl5.005/lib/site_perl/5.005". The files required can then be installed with

   # replace 0.13 with the version you have
   gunzip perl-ldap-0.13.tar.gz
   tar xvf perl-ldap-0.13.tar
   cd perl-ldap-0.13/lib
   cp * /usr/local/perl/perl5.005/lib/site_perl/5.005

How can I load Perl-LDAP into an ActiveState Perl installation.

There are several ways that Perl-LDAP can be installed into an ActiveState Perl tree.

 1.  The ActiveState ppm command can be used to install Perl-LDAP.
     When a new version of Perl-LDAP is released, it takes ActiveState
     a period of time to get the new release into the ActiveState ppm
     system.
 2.  If the user has nmake installed, the user can do a normal perl
     module install using nmake instead of make.
 3.  If the user does not have nmake or make, the user can install
     Perl-LDAP using the install-nomake script by issuing the
     following command.
       perl install-nomake

     The install-nomake script can be used on any system that does not
     have make installed.

What other modules will I need ?

perl-ldap does use other modules. Some are required, but some are optional (ie required to use certain features)
Convert::ASN1

This module is required for perl-ldap to work.

You can obtain the latest release from
http://search.cpan.org/search?module=Convert::ASN1

Digest::MD5

This module is optional. It also requires a C compiler when installing. You only need to install Digest::MD5 if you want to use the SASL authentication method.

You can obtain the latest release from
http://search.cpan.org/search?module=Digest::MD5

URI::ldap

This module is optional. You only need to install URI::ldap if you are going to need to parse ldap referrals. Net::LDAP does not do this automatically yet, so this module is not used by perl−ldap.

You can obtain the latest release from
http://search.cpan.org/search?module=URI::ldap

OpenSSL and IO::Socket::SSL for Net::LDAPS

If you want to use Net::LDAP::LDAPS you will need this module and the OpenSSL software package.

You can obtain the latest release of IO::Socket::SSL from
http://search.cpan.org/search?module=IO::Socket::SSL

You can obtain the latest release of OpenSSL from
http://www.openssl.org/

If you are using a Linux system, many of the distributions have RPM packages that you can install. Use your favorite web search engine to find the package that you need.

XML::SAX

If you want to use Net::LDAP::DSML you will need this module.

You can obtain the latest release from
http://search.cpan.org/search?module=XML::SAX

ResourcePool::Factory::Net::LDAP

If you want to use failover the ResourcePool::Factory::Net::LDAP perl module provides methods to do this.

You can obtain the latest release from
http://search.cpan.org/search?module=ResourcePool::Factory::Net::LDAP

USING NET::LDAP

How do I connect to my server ?

The connection to the server is created when you create a new Net::LDAP object, e.g.

  $ldap = Net::LDAP->new($server);

Net::LDAP−>new sometimes returns undef, why ?

The constructor will return undef if there was a problem connecting to the specified server. Any error message will be available in $@

What is the proper format of the bind DN .

The DN used to bind to a directory is a FULLY QUALIFIED DN . The exact structure of the DN will depend on what data has been stored in the server.

The following are valid examples.

  uid=clif,ou=People,dc=umich,dc=edu
  cn=directory manager,ou=admins,dc=umich,dc=edu

In some servers the following would be a valid fully qualified DN of the directory manager.

  cn=directory manager

How can I tell when the server returns an error, bind() always returns true ?

Most methods in Net::LDAP return a Net::LDAP::Message object, or a sub-class of that. This object will hold the results from the server, including the result code.

So, for example, to determine the result of the bind operation.

  $mesg = $ldap->bind( $dn, password => $passwd );

  if ( $mesg->code ) {
    # Handle error codes here
  }

How can I set the LDAP version of a connection to my ldap server?

This is done by adding the version option when binding to the LDAP server.

For example;

  $mesg = $ldap->bind( $dn, password => $passwd, version => 3 );

Valid version numbers are 2 and 3.

I did a search on my directory using the ’search’ method. Where did the results go ?

Your search results are stored in a ’search object’. Consider the following:

 use Net::LDAP;

 $ldap = Net::LDAP->new(’ldap.acme.com’) or die "$@";
 $mesg = $ldap->search(
                       base   => "o=acme.com",
                       filter => "uid=jsmith",
                      );

$mesg is a search object. It is a reference blessed into the Net::LDAP::Search package. By calling methods on this object you can obtain information about the result and also the individual entries.

The first thing to check is if the search was successful. This is done with with the method $mesg−>code. This method will return the status code that the server returned. A success will yield a zero value, but there are other values, some of which could also be considered a success. See Net::LDAP::Constant

  use Net::LDAP::Util qw(ldap_error_text);

  die ldap_error_text($mesg->code)
    if $mesg->code;

There are two ways in which you can access the entries. You can access then with an index or you can treat the container like a stack and shift each entry in turn. For example

  # as an array
  # How many entries were returned from the search
  my $max = $mesg->count;
  for( my $index = 0 ; $index < $max ; $index++) {
    my $entry = $mesg->entry($index);
    # ...
  }
  # or as a stack

  while( my $entry = $mesg->shift_entry) {
    # ...
  }

In each case $entry is an entry object. It is a reference blessed into the Net::LDAP::Entry package. By calling methods on this object you can obtain information about the entry.

For example, to obtain the DN for the entry

  $dn = $entry->dn;

To obtain the attributes that a given entry has

  @attrs = $entry->attributes;

And to get the list of values for a given attribute

  @values = $entry->get( ’sn’ );

And to get the first of the values for a given attribute

  $values = $entry->get( ’cn’ );

One thing to remember is that attribute names are case insensitive, so ’sn’, ’Sn’, ’sN’ and ’ SN ’ are all the same.

So, if you want to print all the values for the attribute ’ou’ then this is as simple as

  foreach ($entry->get_value( ’ou’ )) {
      print $_,"\n";
    }

Now if you just want to print all the values for all the attributes you can do

  foreach my $attr ($entry->attributes) {
    foreach my $value ($entry->get_value($attr)) {
      print $attr, ": ", $value, "\n";
    }
  }

How do I limit the scope of a directory search.

You limit the scope of a directory search by setting the scope parameter of search request. Consider the following:

 use Net::LDAP;

 $ldap = Net::LDAP->new(’ldap.acme.com’) or die "$@";
 $mesg = $ldap->search(
                       base   => "o=acme.com",
                       scope  => ’sub’,
                       filter => "uid=jsmith",
                      );

Values for the scope parameter are as follows.

 base  Search only the base object.
 one   Search the entries immediately below the base
       object.

 sub   Search the whole tree below the base object.
       This is the default.

GETTING SEARCH RESULTS

There are two ways of retrieving the results of a requested LDAP search; inline and by using a callback subroutine.

USING THE INLINE APPROACH

Using the inline approach involves requesting the data and then waiting for all of the data to be returned before the user starts processing the data.

Example:

 use Net::LDAP;
 $ldap = Net::LDAP->new(’ldap.acme.com’) or die "$@";
 $mesg = $ldap->search(
                       base   => "o=acme.com",
                       scope  => ’sub’,
                       filter => "sn=smith",
                      );
  #
  # At this point the user can get the returned data as an array
  # or as a stack.
  # In this example we will use an array
  # How many entries were returned from the search
  my $max = $mesg->count;
  for( my $index = 0 ; $index < $max ; $index++)
  {
    my $entry = $mesg->entry($index);
    my $dn = $entry->dn; # Obtain DN of this entry

    @attrs = $entry->attributes; # Obtain attributes for this entry.
    foreach my $var (@attrs)
    {
     #get a list of values for a given attribute
     $attr = $entry->get_value( $var, asref => 1 );
     if ( defined($attr) )
     {
         foreach my $value ( @$attr )
         {
          print "$var: $value\n";  # Print each value for the attribute.
         }
     }
    }
  }

As you can see the example is straight forward, but there is one drawback to this approach. You must wait until all entries for the request search to be returned before you can process the data. If there several thousand entries that match the search filter this could take quite a long time period.

USING THE CALLBACK SUBROUTINE APPROACH

Using the callback approach involves requesting the data be sent to a callback subroutine as each entry arrives at the client.

A callback is just a subroutine that is passed two parameters when it is called, the mesg and entry objects.

Example:

 use Net::LDAP;
 $ldap = Net::LDAP->new(’ldap.acme.com’) or die "$@";
 $mesg = $ldap->search(
                       base   => "o=acme.com",
                       scope  => ’sub’,
                       filter => "sn=smith",
                       callback => \&callback,
                      );
 #
 # At this point the user needs to check the status of the
 # ldap search.
 #
 if ( $mesg->code )
 {
    $errstr = $mesg->code;
    print "Error code:  $errstr\n";
    $errstr = ldap_error_text($errstr);
    print "$errstr\n";
 }
 sub callback
 {
 my ( $mesg, $entry) = @_;
   #
   # First you must check to see if something was returned.
   # Last execution of callback subroutine will have no
   # defined entry and mesg object
   #
   if ( !defined($entry) )
   {
     print "No records found matching filter $match.\n"
     if ($mesg->count == 0) ; # if mesg is not defined nothing will print.
     return;
   }
   my $dn = $entry->dn; # Obtain DN of this entry
   @attrs = $entry->attributes; # Obtain attributes for this entry.
   foreach my $var (@attrs)
   {
    #get a list of values for a given attribute
    $attr = $entry->get_value( $var, asref => 1 );
    if ( defined($attr) )
    {
      foreach my $value ( @$attr )
      {
        print "$var: $value\n";  # Print each value for the attribute.
      }
    }
   }
   #
   # For large search requests the following 2 lines of code
   # may be very important, they will reduce the amount of memory
   # used by the search results.
   #
   # If the user is not worried about memory useage then the 2 lines
   # of code can be omitted.
   #
   $mesg->pop_entry;
 }  # End of callback subroutine

As you can see the example is straight forward and it does not waste time waiting for all of the entries to be returned. However if the pop_entry method is not used the callback approach can allocate a lot of memory to the search request.

USING NET::LDAPS

Using an SSL network connection, how do I connect to my server?

This class is a subclass of Net::LDAP so all the normal Net::LDAP methods can be used with a Net::LDAPS object; see the documentation for Net::LDAP to find out how to query a directory server using the LDAP protocol.

The connection to the server is created when you create a new Net::LDAPS object, e.g.

  $ldaps = Net::LDAPS->new($server,
                           port => ’10000’,
                           verify => ’require’,
                           capath => ’/usr/local/cacerts/’,
                           );

There are additional options to the LDAPS new method and several additional methods are included in the LDAPS object class.

For further information and code examples read the LDAPS module documentation; perldoc Net::LDAPS

USING LDAP GROUPS.

What are LDAP groups.

LDAP groups are object classes that contain an attribute that can store multiple DN values. Two standard object classes are ’groupOfNames’ (which has a ’member’ attribute) and ’groupOfUniqueNames’ (which has a ’uniqueMember’ attribute.)

A group can be a member of another group.

Two scripts for working with groups are available in the contrib directory. They are isMember.pl and printMembers.pl.

How do you format a filter to search for entries whose ’member’ attribute has a particular value?

Asking for (member=*) is OK − the directory uses the equality matching rule which is defined for the member attribute.

Asking for (member=c*) is not OK − there is no defined substring matching rule for the member attribute. That’s because the member values are *not* strings, but distinguished names. There is no substring matching rule for DNs, see RFC 2256 section 5.50.

What you have to do is get the results of (member=*) and then select the required results from the returned values. You need to do this using knowledge of the string representation of DNs defined in RFC 2253, which is important because the same DN can have different string representations. So you need to perform some canonicalization if you want to be correct.

USING DSML.

How can I access DSML features from PERL−LDAP .

Directory Service Markup Language ( DSML ) is the XML standard for representing directory service information in XML .

Support for DSML is include in PERL-LDAP starting with version .20.

At the moment this module only reads and writes DSML entry entities. It cannot process any schema entities because schema entities are processed differently than elements.

Eventually this module will be a full level 2 consumer and producer enabling you to give you full DSML conformance.

The specification for DSML is at http://www.dsml.org/

For further information and code examples read the DSML module documentation; perldoc Net::LDAP::DSML

USING CONTROLS AND VIRTUAL LISTS.

How do I access the Control features.

Support for LDAP version 3 Control objects is included in perl-ldap starting with version .20.

For further information and code examples read the Control module documentation; perldoc Net::LDAP::Control

How do I access the Virtual List features.

Support for Virtual Lists is included in perl-ldap starting with version .20.

For further information and code examples read the Control module documentation; perldoc Net::LDAP::Control

GENERAL QUESTIONS.

Are there any other code examples.

Yes, there is an Examples pod file. To view the pod do the following command; perldoc Net::LDAP::Examples

There is user contributed software in the contrib directory that is supplied with the PERL-LDAP distribution. This is an excellent source of information on how to use the PERL-LDAP module.

Can I contribute perl scripts that use perl-ldap to the contrib section?

Any one can submit a perl script that uses perl-ldap for inclusion in the contrib section. Graham Barr will determine if the script will be included and will do the initial check in of the script to the CVS system on sourceforge. Graham will make you the owner/developer of the script.

There are a couple of requirements for consideration.

You must supply a one line description of your script to be included in the contrib readme file.

Inside the script will be the pod documentation for the script. No auxiliary documentation will be allowed. For examples of how to do this see the tklkup or schema scripts currently in the contrib section.

If Graham decides to include your script in the contrib section, you must register with sourceforge before your scripts will be put into the contrib CVS system.

Is possible to get a complete entry, DN and attributes without specifying the attributes name?

Yes, just specify you want a list of no attributes back. The RFC says that this tells the server to return all readable attributes back (there may be access controls to prevent some from being returned.)

So in the search method, just set (for LDAPv2):

                attrs => [ ]

If you are using LDAPv3, you can specify an attribute called "*" instead, which lets you ask for additional (eg operational) attributes in the same search.

                attrs => [ "*" ]

How do I put a JPEG photo into a entry in the directory.

Follow the following code example, replacing the (...) with whatever is relevant to your setup.

  use Net::LDAP;
  use Net::LDAP::Util qw(ldap_error_text);
  use CGI;
  local $/ = undef;
  my $jpeg = <$filename>;

  my $ldap = Net::LDAP->new(...);
  my $res = $ldap->bind(...);
     $res = $ldap->modify(...,
                   add => [ ’jpegPhoto’ => [ $jpeg ] ]);
     $res = $ldap->unbind();

How do I add a jpeg photo into a entry in the directory via html−forms.

Follow the following code example, replacing the (...) with whatever is relevant to your setup.

  use Net::LDAP;
  use Net::LDAP::Util qw(ldap_error_text);
  use CGI;
  my $q = new CGI;
  print $q->header;
  print $q->start_html(-title => ’Change JPEG photo’);
  if ($q->param(’Update’)) {
          my $filename = $q->param(’jpeg’);
          local $/ = undef;
          my $jpeg = <$filename>;
          my $ldap = Net::LDAP->new(...);
          my $res = $ldap->bind(...);
          $res = $ldap->modify(...,
                          add => [ ’jpegPhoto’ => [ $jpeg ] ]);
          $res = $ldap->unbind();
  } else {
          print $q->start_multipart_form();
          print $q->filefield(-name => ’jpeg’, -size => 50);
          print $q->submit(’Update’);
          print $q->end_form();
  }
  print $q->end_html();

What happens when you delete an attribute that does not exist.

It is an error to delete an attribute that doesn’t exist. When you get the error back the server ignores the entire modify operation you sent it, so you need to make sure the error doesn’t happen.

Another approach, if you are using LDAPv3 (note Net::LDAP does not use LDAPv3 by default) is to use a ’replace’ with your attribute name and no values. In LDAPv3, this is defined to always work even if that attribute doesn’t exist in the entry.

ie:

  my $mesg = $ldap->modify( $entry, replace => { %qv_del_arry } );

But make sure you are using LDAPv3, because that is defined to not work in LDAPv2. (A nice incompatibility between LDAPv2 and LDAPv3.)

How can I delete a referral from an LDAP tree.

Since this is a proprietary feature, you will have to check your server’s documentation. You might find that you need to use a control. If there is a control called something like managedsait, that’s the one you should probably use. For proper operation you will need the oid number for managedsait; 2.16.840.1.113730.3.4.2 and do not specify a value for type.

The code required will look similar to the following code snippet.

  $mesg =  $ldap->delete("ref=\"ldap://acme/c=us,o=bricks\",o=clay",
                  control => {type => "2.16.840.1.113730.3.4.2"} );

How do I add an ACI/ACL entry to a directory server with Perl−LDAP.

ACIs and ACLs are proprietary features in LDAP . The following code snippet works with a Netscape directory server. You will need the specify the correct DN (−DN−) and correct attribute(s) (−nom attr−).

  my $aci = ’(target="ldap:///-DN-")(targetattr="-nom attr-")(version 3.0;
              acl "-nom acl-"; deny(all) userdn = "ldap:///self";)’ ;

  $ldap->modify($dn_modif, add => {’aci’ => $aci });

How do I avoid file type and data type mis-matching when loading data from a Win32 system.

When loading a binary attribute with data read from a file on a Win32 system, it has been noted that you should set "binmode" on the file before reading the file contents into the data array.

Another possible solution to this problem is to convert the binary data into a base64 encoded string and then store the encoded string in the file. Then when reading the file, decode the base64 encoded string back to binary and then use perl ldap to store the data in the directory.

How do I create a Microsoft Exchange user.

This is a solution provide by a perl-ldap user.

This code works with ActiveState Perl running on WinNT 4. Please note that this requires the Win32::Perms module, and needs valid NT account info to replace the placeholders.

  use Net::LDAP;
  use Net::LDAP::Util;
  use Win32::Perms;
  #Constants taken from ADSI Type Library
  $ADS_RIGHT_EXCH_ADD_CHILD = 1;
  $ADS_RIGHT_EXCH_DELETE = 0x10000;
  $ADS_RIGHT_EXCH_DS_REPLICATION = 64;
  $ADS_RIGHT_EXCH_DS_SEARCH = 256;
  $ADS_RIGHT_EXCH_MAIL_ADMIN_AS = 32;
  $ADS_RIGHT_EXCH_MAIL_RECEIVE_AS = 16;
  $ADS_RIGHT_EXCH_MAIL_SEND_AS = 8;
  $ADS_RIGHT_EXCH_MODIFY_ADMIN_ATT = 4;
  $ADS_RIGHT_EXCH_MODIFY_SEC_ATT = 128;
  $ADS_RIGHT_EXCH_MODIFY_USER_ATT = 2;
  $EXCH_USER_RIGHTS = $ADS_RIGHT_EXCH_MAIL_RECEIVE_AS ⎪
  $ADS_RIGHT_EXCH_MAIL_SEND_AS ⎪
  $ADS_RIGHT_EXCH_MODIFY_USER_ATT;
  $exch = Net::LDAP->new(’server’, debug =>0) ⎪⎪ die $@;
  $exch->bind( ’cn=admin_user,cn=nt_domain,cn=admin’, version =>3,
  password=>’password’);
  $myObj = Win32::Perms->new();
  $Result = $myObj->Owner(’nt_domain\user_name’);
  $myObj->Group(’nt_domain\Everyone’);
  $myObj->Allow(’nt_domain\user_name’,
  $EXCH_USER_RIGHTS,OBJECT_INHERIT_ACE);
  $BinarySD = $myObj->GetSD(SD_RELATIVE);
  $TextSD = uc(unpack( "H*", $BinarySD ));
  Win32::Perms::ResolveSid(’nt_domain\user_name’, $sid);
  $mysid = uc(unpack("H*",$sid));
  $result = $exch->add ( dn   =>
                ’cn=user_name,cn=container,ou=site,o=organisation’,
                attr => [ ’objectClass’ => [’organizationalPerson’],
                          ’cn’   => ’directory_name’,
                          ’uid’ => ’mail_nickname’,
                          ’mail’ => ’smtp_address’,
                        ’assoc-nt-account’ => [ $mysid ],
                        ’nt-security-descriptor’ => [ $TextSD ],
                        ’mailPreferenceOption’  => 0
                        ]
              );
  print ldap_error_name($result->code);

How can I simulate server failover.

Perl-LDAP does not do server failover, however there are several programming options for getting around this situation.

Here is one possible solution.

   unless ( $ldaps =
            Net::LDAPS->new($ldapserverone,
                            port=>636,timeout=>5) )
           {
            $ldaps = Net::LDAPS->new($ldapservertwo,
                                     port=>636,timeout=>20) ⎪⎪
            return
            "Can’t connect to $ldapserverone or $ldapservertwo via LDAPS: $@";
           }

Using X.509 certificates.

How do I store X.509 certificates in the directory?

The first problem here is that there are many different formats to hold certificates in, for example PEM , DER , PKCS#7 and PKCS#12. The directory only uses the DER format (more correctly, it only uses the BER format) which is a binary format.

Your first job is to ensure that your certificates are therefore in DER/BER format. You could use OpenSSL to convert from PEM like this:

        openssl x509 -inform PEM -in cert.pem -outform DER -out cert.der

Consult the OpenSSL documentation to find out how to perform other conversions.

To add a certificate to the directory, just slurp in the DER/BER certificate into a scalar variable, and add it to the entry’s userCertificate attribute. How you do that will depend on which version of LDAP you are using.

To slurp in the certificate try something like this:

    my $cert;
    {
        local $/ = undef; # Slurp mode
        open CERT, "cert.der" or die;
        binmode CERT;
        $cert = <CERT>;
        close CERT;
    }
    # The certificate is now in $cert

For LDAPv2, because most directory vendors ignore the string representation of certificates defined in RFC 1778, you should add this value to the directory like this:

    $res = $ldap->modify("cn=My User, o=My Company,c=XY",
                         add => [
                                 ’userCertificate’ => [ $cert ]
                                ]);
    die "Modify failed (" . ldap_error_name($res->code) . ")\n"
        if $res->code;

For LDAPv3, you must do this instead:

    $res = $ldap->modify("cn=My User, o=My Company, c=XY",
                         add => [
                                 ’userCertificate;binary’ => [ $cert ]
                                ]);
    die "Modify failed (" . ldap_error_name($res->code) . ")\n"
        if $res->code;

Of course, the entry you are trying to add the certificate to must use object classes that permit the userCertificate attribute, otherwise the modify will fail with an object class violation error. The inetOrgPerson structural object class permits userCertificates, as does the strongAuthenticationUser auxiliary object class. Others might also.

ADDITIONAL DIRECTORY AND LDAP RESOURCES.

URL (s).

Directory Services Mark Language ( DSML ) http://www.dsml.org/

eMailman LDAP information http://www.emailman.com/ldap/

Rafael Corvalan’s LDAP shell http://sf.net/projects/ldapsh

LDAPS , also known as LDAPGURU . This web site has a nasty habit of resizing the browser to cover the WHOLE screen. http://www.ldaps.com

Jeff Hodges’s Kings Mountain LDAP http://www.kingsmountain.com/ldapRoadmap.shtml

Mark Wahl’s LDAP World at Innosoft. http://www.innosoft.com/ldapworld/

Open Source LDAP Directory Server. http://www.openldap.org/

CriticalPath http://www.cp.net/

Innosoft http://www.innosoft.com

Isode (was MessagingDirect) http://www.isode.com/

Netscape Directory Developers Area http://developer.netscape.com/directory/

Nexor’s X.500 and Internet Directories http://www.nexor.com/info/directory.htm/

Novell’s LDAPzone http://ldapzone.com/

Octet String http://www.octetstring.com/

SUN JAVA JNDI (Java Naming and Directory Interface) http://www.java.sun.com/jndi/

Sun One, formerly Iplanet. http://wwws.sun.com/software/

Eine deutsche LDAP Website A german LDAP Website http://verzeichnisdienst.de/ldap/Perl/index.html

The 2 following URLs deal mainly with Microsoft’s Active Directory.

Directory Works http://directoryworks.com/

ActiveX LDAP Client http://www.polonia−online.com/ldap/

BOOKS

Developing LDAP and ADSI Clients for Microsoft(R) Exchange. By Sven B. Schreiber. ISBN: 0201657775

Implementing LDAP . By Mark Wilcox. ISBN: 1861002211

LDAP : Programming Directory-Enabled Applications With Lightweight Directory Access Protocol. By Tim Howes, Mark Smith. ISBN: 1578700000

LDAP Programming; Directory Management and Integration in Perl. By Clayton Donley. ISBN: 1884777910

LDAP Programming with Java. By Rob Weltman, Tony Dahbura. ISBN: 0201657589

Managing Enterprise Active Directory Services. By Robbie Allen, Richard Puckett. ISBN: 0672321254

Solaris and LDAP Naming Services. By Tom Bialaski, Michael Haines. ISBN: 0−13−030678−9

Understanding and Deploying LDAP Directory Services (2ed). By Tim Howes, Mark Smith, Gordon Good ISBN: 0672323168

LDAP Directories Explained. By Brian Arkills. ISBN 0−201−78792−X

AUTHORS

Any good FAQ is made up of many authors, everyone that contributes information to the perl-ldap mail list is a potential author.

An attempt to maintain this FAQ is being done by Chris Ridd
<chris.ridd@isode.com>. It was previously updated by Clif Harden
<charden@pobox.com>.

The original author of this FAQ was Graham Barr <gbarr@pobox.com>

Please report any bugs, or post any suggestions, to the perl-ldap mailing list <perl−ldap@perl.org>.

COPYRIGHT

Copyright (c) 1999−2000 Graham Barr. All rights reserved. This document is distributed, and may be redistributed, under the same terms as Perl itself.



Net::LDAP::FAQ(3pm)