GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
CentOS 3.3 |
|
 |
aha152x_cs(4) |
 |
aha152x_cs − Adaptec AHA-152X compatible PCMCIA device driver
insmod aha152x_cs.o [pc_debug=n] [irq_list=i,j,...] [host_id=n] [reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]
aha152x_cs is the low-level Card Services driver for various PCMCIA SCSI adapters that are compatible with the Adaptec AHA-152X host adapter. These include the New Media Bus Toaster, the Adaptec AHA-1460, and various other OEM cards.
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
host_id=n
Specifies the SCSI ID of the host adapter. The default host ID is 7.
reconnect=n
Enables support for disconnect/reconnect, if non-zero. The default is 1 (true).
parity=n
Enables SCSI parity checking. The default is 1 (true).
synchronous=n
Enables negotiation of synchronous SCSI transfers. The default is 0 (false).
reset_delay=n
Specifies a delay for SCSI bus resets, in 10 millisecond intervals. The default is 100.
ext_trans=n
Enables the ’’extended translation’’ scheme for partition tables of drives larger than 1 GB.
David Hinds − dahinds@users.sourceforge.net
cardmgr(8), pcmcia(5).
|
aha152x_cs(4) | |