GNU/Linux man pages
Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :
GNU/Linux |
CentOS 2.1AS(Slurm) |
|
 |
sndconfig(8) |
 |
sndconfig − configure sound card for use with Linux kernel modules
sndconfig {−−help,−−noprobe,−−noautoconfig}
sndconfig sets up the necessary configuration files to use a sound card on a Red Hat system. If PnP support is compiled in, by default sndconfig will do an initial probe for PnP sound cards using the pnpdump utility. If the −−noprobe option is given this step will be skipped. The user will be notified if any cards were found. Otherwise the user must pick the card type from a menu. Then the user must choose the I/O port, IRQ, and DMA settings for the sound card. These must be known ahead of time and depend upon the jumper settings of the sound card. For PnP cards, the program will determine settings for the card; if the −−noautoconfig option is given the user can choose the values which will be programmed into the PnP device. There is no guarantee that the values entered do not conflict with an existing non-PnP or PnP device. The user must make sure these types of conflicts do not occur.
OPTIONS
|
−−help |
Print a usage message on standard output and exit successfully. |
−−noprobe
No probe will be made for PnP cards, and the PnP configuration files will not be changed.
−−noautoconfig
No autoconfiguration of PnP cards will be done; the user will be prompted for settings.
/etc/sysconfig/soundcard Stores current settings /etc/modules.conf Stores sound module configuration /etc/isapnp.conf Stores PnP configuration
isapnp(1), pnpdump(1)
|
sndconfig(8) | |