GNU/Linux man pages

Livre :
Expressions régulières,
Syntaxe et mise en oeuvre :

ISBN : 978-2-7460-9712-4
EAN : 9782746097124
(Editions ENI)


CentOS 2.1AS







h2xs − convert .h C header files to Perl extensions


h2xs [−ACOPXacdfkmx] [−F addflags] [−M fmask] [−n module_name] [−o tmask] [−p prefix] [−s subs] [−v version] [headerfile ... [extra_libraries]]

h2xs −h


h2xs builds a Perl extension from C header files. The extension will include functions which can be used to retrieve the value of any #define statement which was in the C header files.

The module_name will be used for the name of the extension. If module_name is not supplied then the name of the first header file will be used, with the first character capitalized.

If the extension might need extra libraries, they should be included here. The extension Makefile.PL will take care of checking whether the libraries actually exist and how they should be loaded. The extra libraries should be specified in the form −lm −lposix, etc, just as on the cc command line. By default, the Makefile.PL will search through the library path determined by Configure. That path can be augmented by including arguments of the form −L/another/library/path in the extra-libraries argument.



Omit all autoload facilities. This is the same as −c but also removes the "use AutoLoader" statement from the .pm file.


Omits creation of the Changes file, and adds a HISTORY section to the POD template.

−F addflags

Additional flags to specify to C preprocessor when scanning header for function declarations. Should not be used without −x.

−M regular expression

selects functions/macros to process.


Allows a pre-existing extension directory to be overwritten.


Omit the autogenerated stub POD section.


Omit the XS portion. Used to generate templates for a module which is not XS-based. "−c" and "−f" are implicitly enabled.


Generate an accessor method for each element of structs and unions. The generated methods are named after the element name; will return the current value of the element if called without additional arguments; and will set the element to the supplied value (and return the new value) if called with an additional argument. Embedded structures and unions are returned as a pointer rather than the complete structure, to facilitate chained calls.

These methods all apply to the Ptr type for the structure; additionally two methods are constructed for the structure type itself, "_to_ptr" which returns a Ptr type pointing to the same structure, and a "new" method to construct and return a new structure, initialised to zeroes.


Omit "constant()" from the .xs file and corresponding specialised "AUTOLOAD" from the .pm file.


Turn on debugging messages.


Allows an extension to be created for a header even if that header is not found in standard include directories.


Print the usage, help and version for this h2xs and exit.


For function arguments declared as "const", omit the const attribute in the generated XS code.


Experimental: for each variable declared in the header file(s), declare a perl variable of the same name magically tied to the C variable.

−n module_name

Specifies a name to be used for the extension, e.g., −n  RPC::DCE

−o regular expression

Use "opaque" data type for the C types matched by the regular expression, even if these types are "typedef"−equivalent to types from typemaps. Should not be used without −x.

This may be useful since, say, types which are "typedef"−equivalent to integers may represent OS-related handles, and one may want to work with these handles in OO-way, as in "$handle−>do_something()". Use "−o ." if you want to handle all the "typedef"ed types as opaque types.

The type-to-match is whitewashed (except for commas, which have no whitespace before them, and multiple "*" which have no whitespace between them).

−p prefix

Specify a prefix which should be removed from the Perl function names, e.g., −p sec_rgy_ This sets up the XS PREFIX keyword and removes the prefix from functions that are autoloaded via the "constant()" mechanism.

−s sub1,sub2

Create a perl subroutine for the specified macros rather than autoload with the constant() subroutine. These macros are assumed to have a return type of char *, e.g., −s sec_rgy_wildcard_name,sec_rgy_wildcard_sid.

−v version

Specify a version number for this extension. This version number is added to the templates. The default is 0.01.


Automatically generate XSUBs basing on function declarations in the header file. The package "C::Scan" should be installed. If this option is specified, the name of the header file may look like "NAME1,NAME2". In this case NAME1 is used instead of the specified string, but XSUBs are emitted only for the declarations included from file NAME2 .

Note that some types of arguments/return-values for functions may result in XSUB-declarations/typemap-entries which need hand-editing. Such may be objects which cannot be converted from/to a pointer (like "long long"), pointers to functions, or arrays. See also the section on the LIMITATIONS of −x entry elsewhere in this document.

−b version

Generates a .pm file which is backwards compatible with the specified perl version.

For versions < 5.6.0, the changes are.
− no use of ’our’ (uses ’use vars’ instead)
− no ’use warnings’

Specifying a compatibility version higher than the version of perl you are using to run h2xs will have no effect.


        # Default behavior, extension is Rusers
        h2xs rpcsvc/rusers
        # Same, but extension is RUSERS
        h2xs -n RUSERS rpcsvc/rusers
        # Extension is rpcsvc::rusers. Still finds <rpcsvc/rusers.h>
        h2xs rpcsvc::rusers
        # Extension is ONC::RPC.  Still finds <rpcsvc/rusers.h>
        h2xs -n ONC::RPC rpcsvc/rusers
        # Without constant() or AUTOLOAD
        h2xs -c rpcsvc/rusers
        # Creates templates for an extension named RPC
        h2xs -cfn RPC
        # Extension is ONC::RPC.
        h2xs -cfn ONC::RPC
        # Makefile.PL will look for library -lrpc in
        # additional directory /opt/net/lib
        h2xs rpcsvc/rusers -L/opt/net/lib -lrpc
        # Extension is DCE::rgynbase
        # prefix "sec_rgy_" is dropped from perl function names
        h2xs -n DCE::rgynbase -p sec_rgy_ dce/rgynbase
        # Extension is DCE::rgynbase
        # prefix "sec_rgy_" is dropped from perl function names
        # subroutines are created for sec_rgy_wildcard_name and sec_rgy_wildcard_sid
        h2xs -n DCE::rgynbase -p sec_rgy_ \
        -s sec_rgy_wildcard_name,sec_rgy_wildcard_sid dce/rgynbase
        # Make XS without defines in perl.h, but with function declarations
        # visible from perl.h. Name of the extension is perl1.
        # When scanning perl.h, define -DEXT=extern -DdEXT= -DINIT(x)=
        # Extra backslashes below because the string is passed to shell.
        # Note that a directory with perl header files would
        #  be added automatically to include path.
        h2xs -xAn perl1 -F "-DEXT=extern -DdEXT= -DINIT\(x\)=" perl.h
        # Same with function declaration in proto.h as visible from perl.h.
        h2xs -xAn perl2 perl.h,proto.h
        # Same but select only functions which match /^av_/
        h2xs -M ’^av_’ -xAn perl2 perl.h,proto.h

        # Same but treat SV* etc as "opaque" types
        h2xs -o ’^[S]V \*$’ -M ’^av_’ -xAn perl2 perl.h,proto.h

Extension based on .h and .c files

Suppose that you have some C files implementing some functionality, and the corresponding header files. How to create an extension which makes this functionality accessable in Perl? The example below assumes that the header files are interface_simple.h and interface_hairy.h, and you want the perl module be named as "Ext::Ension". If you need some preprocessor directives and/or linking with external libraries, see the flags "−F", "−L" and "−l" in the section on "OPTIONS".
Find the directory name

Start with a dummy run of h2xs:

  h2xs -Afn Ext::Ension

The only purpose of this step is to create the needed directories, and let you know the names of these directories. From the output you can see that the directory for the extension is Ext/Ension.

Copy C files

Copy your header files and C files to this directory Ext/Ension.

Create the extension

Run h2xs, overwriting older autogenerated files:

  h2xs -Oxan Ext::Ension interface_simple.h interface_hairy.h

h2xs looks for header files after changing to the extension directory, so it will find your header files OK .

Archive and test

As usual, run

  cd Ext/Ension
  perl Makefile.PL
  make dist
  make test


It is important to do "make dist" as early as possible. This way you can easily merge(1) your changes to autogenerated files if you decide to edit your ".h" files and rerun h2xs.

Do not forget to edit the documentation in the generated .pm file.

Consider the autogenerated files as skeletons only, you may invent better interfaces than what h2xs could guess.

Consider this section as a guideline only, some other options of h2xs may better suit your needs.


No environment variables are used.


Larry Wall and others


the perl manpage, the perlxstut manpage, the ExtUtils::MakeMaker manpage, and the AutoLoader manpage.


The usual warnings if it cannot read or write the files involved.


h2xs would not distinguish whether an argument to a C function which is of the form, say, "int *", is an input, output, or input/output parameter. In particular, argument declarations of the form

        int *n

should be better rewritten as

        int &n

if "n" is an input parameter.

Additionally, h2xs has no facilities to intuit that a function

        char *addr
        int   l

takes a pair of address and length of data at this address, so it is better to rewrite this function as

            SV *addr
            STRLEN len;
            char *s;
            s = SvPV(sv,len);
            RETVAL = foo(s, len);

or alternately

    static int
    my_foo(SV *sv)
        STRLEN len;
        char *s = SvPV(sv,len);
        return foo(s, len);
    MODULE = foo        PACKAGE = foo   PREFIX = my_
        SV *sv

See the perlxs manpage and the perlxstut manpage for additional details.